Air ride and laying frame

[PBFAB.COM]

Originally Posted by Rednwhitec20

The rear is going to be a 4 link not trailing arms thanks though. And my dropmember includes drop spindles.

Let's just make sure we are on the same page....

If you want to keep the C20 8 lug pattern up front, then you would need to run one of our C20 lower control arms.

The C20 ball joints will not go into a C10 lower control arm, as the ball joint housing is much bigger. The uppers will, but the lowers will not.

That would be an extra expense.

Nate