1964 GMC 3/4 ton build :D

[sdwolff98]

Well started a few more things this last week lol..... hydroboost unit came in from my dallas friend at a dealership that makes inventory his boss says aint needed on inventory disappear lol...... Started working on cutting the mounting plate to fir the firewall holes for the factory master cylinder mount and clear the firewall steering brace. Twas a bloody booger getting that dammed nut off without a vice lol but I prevailed lol. Will have to make a couple of small spacer panels for the unit and cut and tap the booster push rod once I get a 1915 year model vice from a friend of mine at work. Also this last week sent the truck to body shop to have the cab worked over and cleaned up. He got started on it last night but the daytime heat out here has slowed him down just alil bit lol. He and I talked for a bit and when I mentioned having to redo all the seam sealer on the exterior of the cab he said he can use raptor liner to seal all of the gaps so we shall see how that goes. As it stands the interior floor, inner firewall, exterior firewall, and under floorboard are getting a smurf blue coating of raptor lining once he pulls the cab off the frame and cleans it up.

Sean

[Captainfab]

You know, I make everything to make that hydroboost a simple bolt on installation, including the nut socket.

[sdwolff98]

Yup I still have the plate from the one I ordered from you fir the suburban. mine had an odd bolt pattern to it plus I am going for flush mounted with a factory modified gasket .
Sean
Posted via Mobile Device