DBW Cruise Issue

[dayj1]

Originally Posted by jackyl9999

Got the resistor in today. Put it on and am still not getting any response from my cruise.

I can hear my relays working when I move the switch. So I do not think my issue is there.


Does the cruise need to be turned on in the tune?

I'm not aware of the ability to enable/disable cruise in the tune. If you're sure that your wiring is correct and that you have the resistor wired in correctly, it could be your VSS. Is the VSS sensor installed in the trans and connected to the PCM? Are your gear ratios, tire sizes, etc correct in the tune?