![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Apr 2014
Location: golden, CO
Posts: 55
|
1968 K2500 power steering conersion???
I'm making progress making the four eyed monster workable. Im installing open knuckle dana 44 with discs and i want to go ahead and convert it to power steering. I have the drag ling on my new axle, and i can buy a power gear box with a 72 pitman arm on it. That should match up fine, my question is mounting the new box. My frame has no dimples, its flat. I have heard varying opinions on whats best and have not been able to get alot of good info for K series. whats the best bracket to use? or a good practice to manipulate the frame. Am i going to need anything else besides a rag joint and ball stud? thanks!!!
Mike
__________________
Paul "Mike" Tzareff ![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: May 2003
Location: Sandown, NH
Posts: 2,819
|
Re: 1968 K2500 power steering conersion???
Power steeing pump
pump brackets Pulleys belt hoses 4x4 power steering box and arm ( different than 2wd ) Spacers for the box to clear the frame and/or some heat and dimple the frame in to clear the box. I think that's it ! If not others will speak up . Gary
__________________
Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859 Last edited by CUSTOM/10; 09-04-2015 at 01:23 PM. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|