Taillight harness retainers/routing - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71CHEVYSHORTBED402** · 11-14-2015, 10:28 AM

First owner, where did you get your wiring? Plugs gave it away. Your clips look to be black rubber coated. Mine are tan, but they're otherwise the same. Turns out I have a hand full of black ones as well. Don't know what they're for, but I suspect they came off with the engine in 1993. I failed to take note.

**FirstOwner69** · 11-14-2015, 11:08 AM

Quote:

Originally Posted by 71CHEVYSHORTBED402

First owner, where did you get your wiring? Plugs gave it away. Your clips look to be black rubber coated. Mine are tan, but they're otherwise the same. Turns out I have a hand full of black ones as well. Don't know what they're for, but I suspect they came off with the engine in 1993. I failed to take note.

The wiring and clips are original to the truck. Not sure what you mean by "Plugs gave it away."

**71CHEVYSHORTBED402** · 11-14-2015, 10:16 PM

Quote:

Originally Posted by FirstOwner69

The wiring and clips are original to the truck. Not sure what you mean by "Plugs gave it away."

The plugs on the rear of my 1971 look nothing like what you have in your 9th image. Yours appears to be plastic to metal. My plugs are rubber. What year is your truck? Ooooooops, I'm guessing 1969. ha!..........There must have been a variance between years.

**FirstOwner69** · 11-14-2015, 10:50 PM

Quote:

Originally Posted by 71CHEVYSHORTBED402

The plugs on the rear of my 1971 look nothing like what you have in your 9th image. Yours appears to be plastic to metal. My plugs are rubber. What year is your truck? Ooooooops, I'm guessing 1969. ha!..........There must have been a variance between years.

Thanks for the clarification. The plugs are rubber. They appear shiny due to reflection from the flash. I may have also put ArmorAll on them after cleaning them.

69 is a good guess on your part.

**71CHEVYSHORTBED402** · 11-14-2015, 10:57 PM

Quote:

Originally Posted by FirstOwner69

Thanks for the clarification. The plugs are rubber. They appear shiny due to reflection from the flash. I may have also put ArmorAll on them after cleaning them.

69 is a good guess on your part.

I'm just real slow is all. Man you cleaned those up nicely. One side appears aluminum. That 10th picture is of the license plate plug right? Mine hasn't been hooked up in a long while.

**FirstOwner69** · 11-15-2015, 12:42 AM

Quote:

Originally Posted by 71CHEVYSHORTBED402

That 10th picture is of the license plate plug right?

Yes.

11-14-2015, 10:28 AM	#26
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,330	Re: Taillight harness retainers/routing First owner, where did you get your wiring? Plugs gave it away. Your clips look to be black rubber coated. Mine are tan, but they're otherwise the same. Turns out I have a hand full of black ones as well. Don't know what they're for, but I suspect they came off with the engine in 1993. I failed to take note. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.