Modular front disk set up interchanges?

[Possmguts]

Im doing the 4 wheels disk on this 67 truck and already have the Wilwood in back. The front already had a setup off a 72 so I installed the disks and calipers to the updated CPP drop spindles CP4S-2 that allowed the factory 67 steering linkage.

What I want to do is find something 5 lug from like a Camaro or something that has modular hubs and disks that will work with the CPP spindles and factory replacement Wilwood calipers. I want to do drilled and slotted rotors to match the rear.
Wilwood only sells the modulars in a big brake kit and is way expensive. I plan on running the chrome 15" corvette rally wheels I already have.

Does anyone know what will work and have the same lug pattern that will still use the factory replacement calipers from Wilwood?

Any input is greatly appreciated.

['68 Newtricks]

check EBC for the hell of it too

[Possmguts]

Didnt see anything in EBC...

This is frustrating... There HAS to be a modular kit that uses factory replacement calipers and factory diameter rotors somewhere.

I Just need the Hubs is all I need as Im sure I could find drilled and slotted rotors and would be able to use Wilwood factory replacement 2 or 4 piston calipers...

[Andy4639]

Want the older big Impala SS hubs work. They are the same as a 5 lug Chevy truck.

[Possmguts]

Originally Posted by Andy4639

Want the older big Impala SS hubs work. They are the same as a 5 lug Chevy truck.

Ill look into it... they have to work with the CPP spindles and factory calipers.. wonder where i could get specs on those... Dont get much research time being on the road....

Thanks for the reply option