Some parts to sell / trade

[Russell]

Hey all

Got some stuff I wanna sell / trade off All prices are in USD (unless I state otherwise)



Steering wheel - $10.00



Driver and Passenger's shoulder seatbelts. Faded / frayed on the driver's side, and both need some oil as they don't retract very well anymore - $10.00 for both



Fan Shroud from a 1976 GMC 3/4 ton with a 350 - $10.00



Pinstriping tape - $1.00
Gas Caps - $5.00 for both
1976 headlight rings, decent shape - $5.00
Dome light backing - $1.00
Tilt steering wheel lower shaft - $5.00
Passenger side Power window switch, works - $7.00
Safety switch (base of the steering column) - $2.00
Ignition switch (middle of the steering column) - $2.00
1976 Wiper Module - $20.00



Half assembled instrumentation pod (needs speedo(with no idiot light holes), mechanical oil pressure gauge, and gas gauge (with one idiot light hole in the center), has volt and temp gauge with parking brake idiot light as well as a seatbelt idiot light) painted chrome, tab on the left is broken and all the gauges need overlays. No plastic sheild - $30.00



Black non-AC dash bezel. Has wiper and light switches on the bezel, it has chrome trimming around the gauges (worn out in some places) I have the bottom peice as well - $15.00



160 km/h speedo with dual idiot lights - $15.00

Gas Gauge with 1 idiot light hole (needs face overlay, finish is damaged and has some overspray on it from painting the back chrome) will include this with the instrument panel for free if not already taken)- $8.00

Gas Gauge with dual idiot lights - $15.00

Tank switch solenoid, no return valve setup. Works, I was gonna use it on my truck, but mine has a return line - $20.00

[Russell]

I am willing to trade for the following:



Three of these door panel pull strap covers (only have one good one, the rest are broken)



Tank switch valve with the return line

Aluminum door panel trim with power window and power lock slots, as well as the trim that goes around the outside of it (same design as the pull strap covers)

[Russell]

Also for sale:

1963 Dodge 1/2. Complete (wheels are somewhere in the shop, even has the keys in the ignition) Needs some body work and a complete mechanical overhaul. This truck would make a cool hotrod (I don't have the money for it, nor do I have the interest in Dodge trucks ) - $200 CND obo

1992 Chevy 1/2 ton extended cab. 5.7 350 that runs well. The truck has a big dent in the side of the driver's door, and needs to have the bowtie on the grill glued back on - $6000 CND obo



















I accept paypal, cash, or mail orders that are accepted in Canada

Thanks everyone!

[danadena1960]

Hey Russell,
Do you have a set of those 80 chevy door speaker covers that you want to get rid of?
Thanks,
Dana

[Russell]

Sorry, I don't have any extras, and I don't think there are any at the local wrecker either.

[Free88]

Danadena are you talkng about the ones that bolt onto the door panal and stick out about 3 inches or so. I think I may have a pair but I will have to blow a trail into the truck on the weekend to find out. I think that is where they are. Pm me your email and I will send a pic if I can find them. I am sure that they are there. I will check with my son and see if he doesn't ant them. Sorry I don't have any definite answers, but I never thought of them untill reading your thread. Actually have the whole cab sitting in the yard under a tarp. Thanks.

[Russell]

Wanna check to see if it has the power window / lock alumn strips, with those trimming strips as well as the pull strap covers?

[76HighSierra]

Russel,

How much to ship those two lime green gas caps to New Mexico, USA???

[MSL]

what shape is the gas gauge in.

[Russell]

Originally posted by 76HighSierra
Russel,

How much to ship those two lime green gas caps to New Mexico, USA???

$15.00 shipped work? The one cap has a bit of a gouge in it, but otherwise appear to be in good condition.

Originally posted by MSL
what shape is the gas gauge in.

Which one? Single idiot light, or dual idiot light? Dual is in mint condition, single will need an overlay as I tried to paint the back chrome, and got a bit of overspray on it. BTW -- I noticed that you are buying the speedo from cochino -- The dual idiot light gauge has the same color pattern as his speedo does.

[MSL]

You know what i asked about gas gauge i meant to ask for the speedo you have i plan to buy cochinos and if yours is in good shape it too.

[Russell]

Mine is a Canadian twin of cochino's, therefor its primary scale is km/h

[Russell]

TTT