TRW vs. MOOG - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 01-19-2004, 11:40 PM

The Parkerizing technique is a Phosphate etching process that produces a hard Matte or Dull finish that is both very Durable and Anti Reflective and with excellent oil holding properties.

CliffB · 01-20-2004, 12:20 AM

I looked up parkerizing on GOOGLE search and it looked like it was usually used for guns? A few posts said it is pretty much obsolete? Is Moog really parkerizing? I'm not remembering any special finish on the front end parts I installed. But hey, it was interesting reading about how to parkerize. I'd never heard of it either.

slam33 · 01-20-2004, 12:09 PM

It's that dull black finish that Moog uses, Dorman use to or still does use the same thing. I looked at some Fed Mogul/ TRW tie rods that had the unfinished cast finish. They looked good but my Moogs are parkerized.

Jace's68 · 01-20-2004, 06:40 PM

I'd go with Moog or AC Delco.

JHZR2 · 02-26-2004, 02:42 PM

On older MB diesel cars' balljoints (sure, its a totally different beast), the moog balljoints had only about half the grease inside that the TRW ones did... And MB parts are ungreasable.

Dont know if this makes much of a difference though.

JMH

Tx Firefighter · 02-26-2004, 02:45 PM

JMH, you're post doesn't make sense. I think you mis-typed.

Welcome to the board too.

JHZR2 · 02-26-2004, 03:03 PM

OOPS! Trying to do too many things at one time...

Thanks,
JMH

Suicide-D · 02-26-2004, 04:44 PM

Moog is American and Canadian Made

TRW Suspension is made in Brazil and others....

But I have used and sold both....no complaints about either one...

O'Reilly's ADC brand is American made also.

01-19-2004, 11:40 PM	#26
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	The Parkerizing technique is a Phosphate etching process that produces a hard Matte or Dull finish that is both very Durable and Anti Reflective and with excellent oil holding properties. __________________ I'm on the Instagram- @Gearhead_Kevin

01-20-2004, 12:20 AM	#27
CliffB Registered User Join Date: Dec 2003 Location: San Leandro, CA Posts: 83	I looked up parkerizing on GOOGLE search and it looked like it was usually used for guns? A few posts said it is pretty much obsolete? Is Moog really parkerizing? I'm not remembering any special finish on the front end parts I installed. But hey, it was interesting reading about how to parkerize. I'd never heard of it either. __________________ 72 C20 3/4 Custom Camper 94 Roadmaster Estate Wagon

01-20-2004, 12:09 PM	#28
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	It's that dull black finish that Moog uses, Dorman use to or still does use the same thing. I looked at some Fed Mogul/ TRW tie rods that had the unfinished cast finish. They looked good but my Moogs are parkerized. __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

02-26-2004, 02:42 PM	#30
JHZR2 Registered User Join Date: Feb 2004 Posts: 2	On older MB diesel cars' balljoints (sure, its a totally different beast), the moog balljoints had only about half the grease inside that the TRW ones did... And MB parts are ungreasable. Dont know if this makes much of a difference though. JMH Last edited by JHZR2; 02-26-2004 at 03:03 PM.

02-26-2004, 02:45 PM	#31
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	JMH, you're post doesn't make sense. I think you mis-typed. Welcome to the board too. __________________ I'm on the Instagram- @Gearhead_Kevin

01-20-2004, 06:40 PM	#29
Jace's68 Registered User Join Date: Sep 2002 Location: Kentucky Posts: 107	I'd go with Moog or AC Delco.

02-26-2004, 03:03 PM	#32
JHZR2 Registered User Join Date: Feb 2004 Posts: 2	OOPS! Trying to do too many things at one time... Thanks, JMH

02-26-2004, 04:44 PM	#33
Suicide-D Registered User Join Date: Jan 2001 Location: Katy, TX...but the love of my life resides in Dublin,OH. Posts: 1,408	Moog is American and Canadian Made TRW Suspension is made in Brazil and others.... But I have used and sold both....no complaints about either one... O'Reilly's ADC brand is American made also.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.