radiator hoses LS swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PowerdbyChevy79 · 01-20-2016, 01:14 PM

whats up guys... starting the mock up of the LS in the 67 what hoses are yall using for the swap...

**michael bustamante** · 01-20-2016, 01:24 PM

im doing the same thing in my 67 too. from what ive seen, most guys are using the same upper rad hose as the doner veh. .
or you can drop some $$$ and get a cust radiator with the top inlet on the passenger side

PowerdbyChevy79 · 01-20-2016, 01:28 PM

Quote:

Originally Posted by michael bustamante

im doing the same thing in my 67 too. from what ive seen, most guys are using the same upper rad hose as the doner veh. .
or you can drop some $$$ and get a cust radiator with the top inlet on the passenger side

ya I have a ron davis radiator.. the top inlet is on the pass side.... just trying get an idea what hoses to grab.. this a crate LS3 so no donor hoses..im going to make a template today go hunting..

brad_man_72 · 01-20-2016, 01:29 PM

It depends on what water pump setup and radiator you are using.
5.3 truck engine/water pump with stock 67-72 radiator - 01 v8 silverado upper and part of my old upper for the lower.

Aruba1 · 01-20-2016, 01:36 PM

I got an "LSX" radiator with passenger side inlet and outlet. I made a upper and lower radiator hoses out of the upper radiator hose.

PowerdbyChevy79 · 01-20-2016, 01:39 PM

Quote:

Originally Posted by Aruba1

I got an "LSX" radiator with passenger side inlet and outlet. I made a upper and lower radiator hoses out of the upper radiator hose.

What hose did you use... do you have a part#

Aruba1 · 01-20-2016, 01:41 PM

Probably I got a 2001 Suburban 1500 suburban hose or something similar.

01-20-2016, 01:14 PM	#1
PowerdbyChevy79 Registered User Join Date: Apr 2013 Location: Houston,Tx Posts: 790	radiator hoses LS swap whats up guys... starting the mock up of the LS in the 67 what hoses are yall using for the swap... __________________ 1966 C10 "Mary" 1972 C10 Cheyenne "Betty" https://67-72chevytrucks.com/vboard/...d.php?t=847364 1979 C10 Silverado "The BIG TEN" https://67-72chevytrucks.com/vboard/...d.php?t=841339 C10 Club Texas -HMIC

01-20-2016, 01:24 PM	#2
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: radiator hoses LS swap im doing the same thing in my 67 too. from what ive seen, most guys are using the same upper rad hose as the doner veh. . or you can drop some $$$ and get a cust radiator with the top inlet on the passenger side __________________ 1967custom

01-20-2016, 01:29 PM	#4
brad_man_72 the boat guy Join Date: Jul 2007 Location: springfield mo Posts: 2,339	Re: radiator hoses LS swap It depends on what water pump setup and radiator you are using. 5.3 truck engine/water pump with stock 67-72 radiator - 01 v8 silverado upper and part of my old upper for the lower. __________________ 67, swb, fleet, tach, throttle, 5.3, 4l60e, 3.73's, fuel cell, 5 lug, p.d.b., 4-6 drop. great little truck 66, stevens drag/ski 18' silouette, 350, 2.02 doublehump heads. comp extreme marine 278 cam, vette 7 fin valve covers, old polished edelbrock intake, velvetdrive, casale v-drive, adj cavitation plate. 28, model a rpu project,

01-20-2016, 01:36 PM	#5
Aruba1 Registered User Join Date: Apr 2014 Location: Birmingham, AL Posts: 560	Re: radiator hoses LS swap I got an "LSX" radiator with passenger side inlet and outlet. I made a upper and lower radiator hoses out of the upper radiator hose.

01-20-2016, 01:41 PM	#7
Aruba1 Registered User Join Date: Apr 2014 Location: Birmingham, AL Posts: 560	Re: radiator hoses LS swap Probably I got a 2001 Suburban 1500 suburban hose or something similar.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.