|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-04-2016, 11:06 PM
|
#1 |
|
Registered User
Join Date: Feb 2016
Location: Washington Court House Ohio
Posts: 92
|
Optional overload spring
Just curious.....
My LWB '72 has the optional overload spring/brackets on both sides. I will soon be doing a 3/4 drop, and was wondering if I need to remove all of this, or just warm up the springs and bend them upwards away from the stops the same distance as stock, after the lowering? I will not be towing with the truck, nor ever hauling anything of heavy weight... Thanks.... |
|
|
|
03-04-2016, 11:36 PM
|
#2 | |
|
The Older Generation
   
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,772
|
Re: Optional overload spring
Quote:
If you aren't going to tow or haul heavy loads I would just remove them. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
|
03-04-2016, 11:43 PM
|
#3 |
|
Registered User
Join Date: Feb 2016
Location: Washington Court House Ohio
Posts: 92
|
Re: Optional overload spring
Thanks.
|
|
|
|
|
03-05-2016, 12:53 AM
|
#4 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Optional overload spring
I removed mine and sold them as soon as I listed them.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
03-05-2016, 02:00 AM
|
#5 |
|
Registered User
Join Date: Dec 2012
Location: Vancouver, Washington
Posts: 1,644
|
Re: Optional overload spring
Yanked mine too and tossed them in the car port
__________________
1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop |
|
|
|
|
03-05-2016, 08:15 AM
|
#6 |
|
Registered User
Join Date: Jun 2014
Location: Orland, Nor-Cal
Posts: 617
|
Re: Optional overload spring
I'm doing the same drop now on my C10 and I'm removing them. Even with no drop they made noise on small bumps from contact.
Gives me an excuse to restore my C20 for heavy loads..... |
|
|
|
|
03-05-2016, 08:29 AM
|
#7 |
|
Registered User
Join Date: Jan 2016
Location: Atlanta, GA
Posts: 26
|
Re: Optional overload spring
I've got them, and I'm about to drop mine. Was gonna just chuck them, but would someone else want them?
|
|
|
|
|
03-05-2016, 11:50 AM
|
#8 |
|
Registered User
Join Date: Jun 2012
Location: springfield mo
Posts: 3,075
|
Re: Optional overload spring
Anyone have a picture of said springs ?
__________________
United States Marine Corps 2000-2011 Iraq and Afghanistan veteran Just living life now and enjoying it and my wife, daughter and son
|
|
|
|
|
03-05-2016, 12:19 PM
|
#9 | |
|
The Older Generation
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,772
|
Re: Optional overload spring
Quote:
http://67-72chevytrucks.com/vboard/s...d.php?t=676334 http://67-72chevytrucks.com/vboard/s...d.php?t=678980 LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
|
03-05-2016, 12:30 PM
|
#10 |
|
Registered User
Join Date: Oct 2011
Location: Victoria, B.C
Posts: 3,794
|
Re: Optional overload spring
I think there were (2) types of overload springs depending on whether the truck came with a leaf spring or coil spring rear end.
Lock doc shows some excellent pics of the coil spring overloads. The leaf spring overloads are different in that there might be a forward and trailing 'rub' bracket riveted to the frame that the overload leaf would ride up against under heavy load. That said, I picked up a pair of the cantilever type for my 1/2 ton coil spring truck....I'm addin' em, rather than subtracting them at this point. Now, with a 3/4 drop or a 2/3 drop would they rub? does anyone have theirs mounted and could they measure up the 'free' gap? Interested. Coley
__________________
....for some men, there is experience, skill and effort....for the others...there is visa and UPS LOL 1966 Chevy 1/2 ton (Florida- Red/white) 1972 Chevy 1/2 ton (California- Blue/white) 2005 Chevy Silverado HD2500/Duramax 2000 Dodge Ram 1500 |
|
|
|
|
03-05-2016, 01:44 PM
|
#11 |
|
Registered User
Join Date: Feb 2016
Location: Washington Court House Ohio
Posts: 92
|
Re: Optional overload spring
my set is like in LocDoc's second picture, and they are listed on the SPID sheet .....
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
