LWB Fleetside to SWB Stepside in Sweden

[Ta2Don]

Originally Posted by Sweden64

Thanks!!, perfect ! do you remeber the thicknes of the wood?
/C

Just walked out and measured the original wood that was in mine when purchased… it measures 18mm

[Sweden64]

Need more help guys !!
Because I´m new i the Chevy world and I´m doing 1,000,000 puzzle with my truck I will have a lot of questions.

I have understod that there is some differenses in the engine mounts/brackets (or what do want to call it). I will post two pictures of the parts I have and my woundering is what i need to get my engine mounts to fit.
The mount that are fittet to the fram is wider than the bracket that will go on the engine

/C

[ibrown50]

Your control arms ( and possibly your cross member) are from a later truck ( 5 lug hubs and rubber bushes) it could be that the mounts are from the same later truck?? One solution would be to source a pair of original 64 banana brackets ( the ones between the cross member and frame) on this forum then I could give you the part number for the original mounts, I could even source them in the UK for you.

[Sweden64]

Originally Posted by ibrown50

Your control arms ( and possibly your cross member) are from a later truck ( 5 lug hubs and rubber bushes) it could be that the mounts are from the same later truck?? One solution would be to source a pair of original 64 banana brackets ( the ones between the cross member and frame) on this forum then I could give you the part number for the original mounts, I could even source them in the UK for you.

Ok thanks, I gonna check it out. I will post a picture so you can se if i found the right part
Is it possible for me to see from what year my front cross member is from??
I want to buy drop spindles for it and I have notice that there is some different models of them
/C