Does anyone know where I can find this bolt? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mmorgan32 · 03-07-2016, 03:43 PM

It's my seat. The bolt that holds the back to the bottom. I've searched my parts catalogs and hardware stores, kragen don't even have it

Jose's 69 · 03-07-2016, 03:48 PM

Try McMaster-Carr. I just got some left hand threaded nuts through them that I could not find anywhere else. Their website is pretty easy to navigate, you just have to know the specs of the bolt.

Davidf · 03-07-2016, 03:49 PM

McMaster-Carr? Looks like it may be a 100 degree flat head machine screw/bolt:

http://www.mcmaster.com/#machine-screws/=11ft4uv

Find the correct size and cut to length, if necessary.

Jose's 69 · 03-07-2016, 03:53 PM

Its like a Grainger. They sell all kinds of supplies and hardware.

68Gold/white · 03-07-2016, 04:00 PM

A hardware specialty place might help you. You'll likely have to spend some minimum amount of $$$ if they have it, be prepared to buy some other bolts, etc, if you find one...

Mmorgan32 · 03-07-2016, 04:36 PM

Awesome thanks. I'll try that.

dfwright · 03-07-2016, 04:50 PM

From the looks of the other one, there's a lock washer integrated with it? If you have a Fastenal nearby, it might be worth taking the other one out and taking down to the Fastenal to see if they have what you need.

I will state the disclaimer that the ones around here have disappointed me a time or two on what I thought should be a commonly available bolt.

You might also want to consider heading over to the parts board, and find DLTRUCK1973's hardware thread and ask if he has one. I've bought a bunch of bolts and other miscellaneous hardware from Tom.

dazza · 03-07-2016, 04:56 PM

not to be a smart-ass, but did you check under your seat? Places like that (garage floor etc) usually have them in stock for me, but I don't realize it until I've gone to great lengths to obtain a replacement!

Mmorgan32 · 03-07-2016, 04:58 PM

Quote:

Originally Posted by dazza

not to be a smart-ass, but did you check under your seat? Places like that (garage floor etc) usually have them in stock for me, but I don't realize it until I've gone to great lengths to obtain a replacement!

First place I looked lol. When I replaced the carpet I looked under the gas tank and under the sill plate covers too

Gromit · 03-07-2016, 05:05 PM

I haven't done this yet; but it was on my list to put a knob-bolt in that location to make it easier to fold the seatback forward when I need access...

The bolt spec should probably at least a grade 5 though if not grade 8 for crash worthiness

Example photo attached - that is just the general idea - the one shown isn't necessarily the right threads or length..

picklito · 03-07-2016, 05:06 PM

Quote:

Originally Posted by dazza

not to be a smart-ass, but did you check under your seat? Places like that (garage floor etc) usually have them in stock for me, but I don't realize it until I've gone to great lengths to obtain a replacement!

Pretty funny. Exactly what I was thinking.

NC_John · 03-07-2016, 05:20 PM

Here is the bolt. Good luck. I need one too but haven't been able to find a suitable replacement.

El Dorado Jim · 03-07-2016, 05:32 PM

try True Value Hardware

AlbertaClassic · 03-07-2016, 06:01 PM

I found some at a local AutoMart. I needed a couple and the guy gave me some for free. They did not have the lock washer on them and they ended up having a hex head. They threaded in perfect. The couple I got don't match the others, but hey, the upholstery goes over them anyways.
Posted via Mobile Device

AlbertaClassic · 03-07-2016, 06:13 PM

I found some at a local AutoMart. I needed a couple and the guy gave me some for free. They did not have the lock washer on them and they ended up having a hex head. They threaded in perfect. The couple I got don't match the others, but hey, the upholstery goes over them anyways.
Posted via Mobile Device

Davidf · 03-07-2016, 06:25 PM

Quote:

Originally Posted by NC_John

Here is the bolt. Good luck. I need one too but haven't been able to find a suitable replacement.

With this picture of the bolt, it looks like a standard flat head Phillips machine screw/bolt, not the 100 degree version. Probably 3/8x16

toolboxchev · 03-07-2016, 06:32 PM

Try Tom @ DLTruck on this site, he has bins of nuts and bolts.

**jamie72** · 03-07-2016, 07:03 PM

junk yard?

Chknlyps2 · 03-07-2016, 07:38 PM

I just checked a 68 GMC I have and both sides have been replaced with 3/8" hex head bolt (9/16" head).

As others have posted a flat head allen cap screw can be found pretty easy at good hardware stores.

Not sure if this is the right length
https://www.fastenal.com/products/de...%20Screws%22|~

Mmorgan32 · 03-07-2016, 08:20 PM

Quote:

Originally Posted by Chknlyps2

I just checked a 68 GMC I have and both sides have been replaced with 3/8" hex head bolt (9/16" head).

As others have posted a flat head allen cap screw can be found pretty easy at good hardware stores.

Not sure if this is the right length
https://www.fastenal.com/products/de...%20Screws%22|~

Ya that's probably what I'll do then. I was trying to find the right one but I'm getting a new seat cover anyways so it won't matter cause it'll be covered up

Procurement_man · 03-07-2016, 08:38 PM

I found them a ACE hardware, it has an Allen head instead of Phillips but works great.

**dutchmanz** · 03-07-2016, 11:46 PM

http://www.mscdirect.com/browse/tn/F...593+4287782570

MSC has all kinds of bolts and fast shipping. I don't remember what size they are but the link should get you close.

**Grumpy old man** · 03-08-2016, 07:25 AM

Ace hardware
Posted via Mobile Device

03-07-2016, 03:43 PM	#1
Mmorgan32 Registered User Join Date: Jul 2013 Location: Fresno, ca Posts: 303	Does anyone know where I can find this bolt? It's my seat. The bolt that holds the back to the bottom. I've searched my parts catalogs and hardware stores, kragen don't even have it Attached Images __________________ 1972 gmc c15 short bed... Sold 1970 chevy custom camper patina daily driver

03-07-2016, 03:48 PM	#2
Jose's 69 Registered User Join Date: Oct 2015 Location: Norwalk, CA Posts: 114	Re: Does anyone know where I can find this bolt? Try McMaster-Carr. I just got some left hand threaded nuts through them that I could not find anywhere else. Their website is pretty easy to navigate, you just have to know the specs of the bolt.

03-07-2016, 03:49 PM	#3
Davidf Registered User Join Date: Nov 2014 Location: Austin Posts: 749	Re: Does anyone know where I can find this bolt? McMaster-Carr? Looks like it may be a 100 degree flat head machine screw/bolt: http://www.mcmaster.com/#machine-screws/=11ft4uv Find the correct size and cut to length, if necessary.

03-07-2016, 03:53 PM	#4
Jose's 69 Registered User Join Date: Oct 2015 Location: Norwalk, CA Posts: 114	Re: Does anyone know where I can find this bolt? Its like a Grainger. They sell all kinds of supplies and hardware.

03-07-2016, 04:00 PM	#5
68Gold/white Registered User Join Date: Sep 2011 Location: Ark City, Kansas Posts: 3,328	Re: Does anyone know where I can find this bolt? A hardware specialty place might help you. You'll likely have to spend some minimum amount of $$$ if they have it, be prepared to buy some other bolts, etc, if you find one...

03-07-2016, 04:36 PM	#6
Mmorgan32 Registered User Join Date: Jul 2013 Location: Fresno, ca Posts: 303	Re: Does anyone know where I can find this bolt? Awesome thanks. I'll try that. __________________ 1972 gmc c15 short bed... Sold 1970 chevy custom camper patina daily driver

03-07-2016, 04:50 PM	#7
dfwright Registered User Join Date: Jan 2009 Location: San Antonio, Texas Posts: 1,374	Re: Does anyone know where I can find this bolt? From the looks of the other one, there's a lock washer integrated with it? If you have a Fastenal nearby, it might be worth taking the other one out and taking down to the Fastenal to see if they have what you need. I will state the disclaimer that the ones around here have disappointed me a time or two on what I thought should be a commonly available bolt. You might also want to consider heading over to the parts board, and find DLTRUCK1973's hardware thread and ask if he has one. I've bought a bunch of bolts and other miscellaneous hardware from Tom. __________________ 1972 C10 LWB, 350/350 Deconstruction began 5/2009, mostly completed restoration, 5/2017

03-07-2016, 04:56 PM	#8
dazza Registered User Join Date: Aug 2002 Location: California Posts: 971	Re: Does anyone know where I can find this bolt? not to be a smart-ass, but did you check under your seat? Places like that (garage floor etc) usually have them in stock for me, but I don't realize it until I've gone to great lengths to obtain a replacement! __________________ --------------------------------------------------------- I'm not crazy, I'm chosen, there's a difference. ---------------------------- '72 K10 SWB, 350, sm465/np205 ---- ----

03-07-2016, 05:05 PM	#10
Gromit Registered User Join Date: Jul 2015 Location: Central Coast, CA Posts: 500	Re: Does anyone know where I can find this bolt? I haven't done this yet; but it was on my list to put a knob-bolt in that location to make it easier to fold the seatback forward when I need access... The bolt spec should probably at least a grade 5 though if not grade 8 for crash worthiness Example photo attached - that is just the general idea - the one shown isn't necessarily the right threads or length.. Attached Images

03-07-2016, 05:20 PM	#12
NC_John Registered User Join Date: Jul 2013 Location: Rockwell, NC Posts: 1,639	Re: Does anyone know where I can find this bolt? Here is the bolt. Good luck. I need one too but haven't been able to find a suitable replacement. __________________ 1970 C-10 LWB "Blu" Instagram (current build pictures) 70_nc_c10

03-07-2016, 05:32 PM	#13
El Dorado Jim Registered User Join Date: Dec 2009 Location: El Dorado Ca Posts: 3,374	Re: Does anyone know where I can find this bolt? try True Value Hardware

03-07-2016, 06:01 PM	#14
AlbertaClassic Registered User Join Date: Nov 2015 Location: Taber Alberta Posts: 400	I found some at a local AutoMart. I needed a couple and the guy gave me some for free. They did not have the lock washer on them and they ended up having a hex head. They threaded in perfect. The couple I got don't match the others, but hey, the upholstery goes over them anyways. Posted via Mobile Device

03-07-2016, 06:13 PM	#15
AlbertaClassic Registered User Join Date: Nov 2015 Location: Taber Alberta Posts: 400	I found some at a local AutoMart. I needed a couple and the guy gave me some for free. They did not have the lock washer on them and they ended up having a hex head. They threaded in perfect. The couple I got don't match the others, but hey, the upholstery goes over them anyways. Posted via Mobile Device

03-07-2016, 06:32 PM	#17
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: Does anyone know where I can find this bolt? Try Tom @ DLTruck on this site, he has bins of nuts and bolts.

03-07-2016, 07:03 PM	#18
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,839	Re: Does anyone know where I can find this bolt? junk yard? __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com



Register or Log In To remove these advertisements.

03-07-2016, 07:38 PM	#19
Chknlyps2 Registered User Join Date: Feb 2016 Location: Anza, CA Posts: 160	Re: Does anyone know where I can find this bolt? I just checked a 68 GMC I have and both sides have been replaced with 3/8" hex head bolt (9/16" head). As others have posted a flat head allen cap screw can be found pretty easy at good hardware stores. Not sure if this is the right length https://www.fastenal.com/products/de...%20Screws%22\|~

03-07-2016, 08:38 PM	#21
Procurement_man Registered User Join Date: Sep 2012 Location: Piedmont, OK Posts: 64	Re: Does anyone know where I can find this bolt? I found them a ACE hardware, it has an Allen head instead of Phillips but works great. __________________ "God will often give you more than you can handle so you can learn to depend on him rather than on yourself" ...Craig Groeschel

03-07-2016, 11:46 PM	#22
dutchmanz Knuckle Buster, Instructor Join Date: May 2010 Location: Pantego, NC Posts: 562	Re: Does anyone know where I can find this bolt? http://www.mscdirect.com/browse/tn/F...593+4287782570 MSC has all kinds of bolts and fast shipping. I don't remember what size they are but the link should get you close. __________________ Current classic fleet: 72 K5 Blazer CST, unrestored factory Orange paint...mostly 69 C10 factory SWB, 454, TH400, Saddle tan, Rust-o-ration 53 Studebaker M35 w/331 Reo gas I-6, Air Force Strata Blue

03-08-2016, 07:25 AM	#23
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Does anyone know where I can find this bolt? Ace hardware Posted via Mobile Device

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.