|
03-12-2016, 08:53 PM
|
#1 |
|
Registered User
Join Date: Jun 2015
Location: Northeast Missouri
Posts: 71
|
Rewire Steering Wheel
I started rewiring my truck today, but ran into a road block. I got the steering wheel off, but how do I get the steering column apart so I can rewire the internals?
|
|
|
|
03-12-2016, 09:02 PM
|
#2 |
|
Senior Member
 
Join Date: Oct 2010
Location: Cadiz, Ky
Posts: 514
|
Re: Rewire Steering Wheel
Everything in the steering column is in the turn signal switch. You can get a new one from the vendors here or pick one up at NAPA.
__________________
1972 Chevy LWB Roadster 1999 Chevy Silverado 2wd 2015 Chevy High Country 4x4 Crew Cab |
|
|
|
|
03-12-2016, 10:25 PM
|
#3 |
|
Registered User
Join Date: Dec 2013
Location: Durango, CO
Posts: 827
|
Re: Rewire Steering Wheel
This info is for a tilt column - not sure if the non-tilts are similar, but depending on what you have it might help. I couldn't get my turn signal switch out of the housing easily, so I ended up taking the housing off first (brass punch), then removing the switch. I had to go deeper into the column anyway for my project. Removing the housing will also make it a little easier to feed the wires through.
__________________
1972 K10 Cheyenne Super | LWB, fleetside | 350/350/205 | KEEPER 1971 K10 Cheyenne | SWB, fleetside | LS Swap 5.3/4L60 | SOLD 1976 Trans Am | 400/4-spd | SOLD 1976 Trans Am | 455/4-spd | TOTALED 
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
