58 Apache chassis rail to bottom of cab measurement

[Scottish58chev]

Hi,

I'm looking for the measurement from the bottom of the chassis rail to the bottom of the cab. I am fitting air ride to the truck and want to know the measurement with the cab fitted. Front cross member at the moment sits about 2 inches from the floor with the suspension fully compressed and i want to see if i'm going to need drop spindles to get it as low as i'd like. My own cab is in storage and is a good bit away from the house at present, plus it would be good to get the measurement from a truck with the cab actually fitted.

Thanks in advance

Calum

[dsraven]

check the old car manuals project, I think it has those dimensions in a blueprint style page. body dimensions maybe? I think orrieg has a link in his posts.

[Valarius_Starchaser]

https://www.gmheritagecenter.com/doc...olet-Truck.pdf

page 16 seems to have what you need my friend 9.63 inches or 244.6mm for those over the pond

[Scottish58chev]

Thanks for that, that's perfect and inches or mm is good. We're still a bit confused this side of the water and use both

Calum