Bench Seat Bracket Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C10agent · 03-22-2016, 04:17 AM

I have done some research on the site and have found that seat brackets from 67 - 72 are different. The seat in my 72 c10 has never bolted in the factory spots. I assume it is a 67 - 72 seat. Can I get a set of 72 bench seat brackets and bolt to seat or is there serious modification?? I appreciate the help!

**special-K** · 03-22-2016, 06:11 AM

There are three designs, 67/68, 69/70, and 71/72. They all bolt to the floor the same. The difference is in appearance and how they bolt to the seat. I guess you need to know the year of your seat to know which brackets you need

C10agent · 03-22-2016, 08:33 AM

So you are saying all brackets are the same bolt pattern to attach to the floor?

**special-K** · 03-22-2016, 09:44 PM

Yes. The '73-87 brackets are longer. The front holes will line up, but not the rear.

03-22-2016, 04:17 AM	#1
C10agent Registered User Join Date: Aug 2013 Location: Navasota, TX Posts: 708	Bench Seat Bracket Question I have done some research on the site and have found that seat brackets from 67 - 72 are different. The seat in my 72 c10 has never bolted in the factory spots. I assume it is a 67 - 72 seat. Can I get a set of 72 bench seat brackets and bolt to seat or is there serious modification?? I appreciate the help! __________________ Neil............... 1972 C10 SWB - Shop Truck in the Works 5.3 LS / Full Air Ride / Rear Notch 20" American Racing Daytonas IG - neilioustx - pictures of build/progress Born and Raised in the Promised Land.... TEXAS Y'ALL!!

03-22-2016, 06:11 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Bench Seat Bracket Question There are three designs, 67/68, 69/70, and 71/72. They all bolt to the floor the same. The difference is in appearance and how they bolt to the seat. I guess you need to know the year of your seat to know which brackets you need __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-22-2016, 08:33 AM	#3
C10agent Registered User Join Date: Aug 2013 Location: Navasota, TX Posts: 708	Re: Bench Seat Bracket Question So you are saying all brackets are the same bolt pattern to attach to the floor? __________________ Neil............... 1972 C10 SWB - Shop Truck in the Works 5.3 LS / Full Air Ride / Rear Notch 20" American Racing Daytonas IG - neilioustx - pictures of build/progress Born and Raised in the Promised Land.... TEXAS Y'ALL!!

03-22-2016, 09:44 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Bench Seat Bracket Question Yes. The '73-87 brackets are longer. The front holes will line up, but not the rear. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.