![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Aug 2012
Location: Mount Dora FL
Posts: 120
|
250 manifold vacuum ports differences
I am replacing my intake manifold on a 250 6 cylinder and the replacement manifold I purchased does not have a vacuum port on the top of the manifold like my original one has. I was using the one on top for the PCV valve and the one on the side for my power brake booster. Can I use the side port for both PCV and brake booster or do I need to look for another manifold?
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,641
|
Re: 250 manifold vacuum ports differences
Just drill and tap the new one for the fitting.
You shouldn't combine the pcv and booster on one. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Aug 2012
Location: Mount Dora FL
Posts: 120
|
Re: 250 manifold vacuum ports differences
Where is the best place to tap? The metal seem thin in the same place the OG manifold is ported.
|
![]() |
![]() |
![]() |
#4 |
Check The Champ, Demonstrator
![]() Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: 250 manifold vacuum ports differences
There was an adapter fitting that went on the side of the manifold that was included in the dealer installation kit.
![]()
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
![]() |
![]() |
![]() |
#5 |
Check The Champ, Demonstrator
![]() Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: 250 manifold vacuum ports differences
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
![]() |
![]() |
![]() |
#6 |
Check The Champ, Demonstrator
![]() Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: 250 manifold vacuum ports differences
If your not particular of originality you could use one of these with adapters.
![]()
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
![]() |
![]() |
![]() |
#7 |
Check The Champ, Demonstrator
![]() Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: 250 manifold vacuum ports differences
![]()
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
![]() |
![]() |
![]() |
#8 |
Check The Champ, Demonstrator
![]() Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: 250 manifold vacuum ports differences
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Aug 2012
Location: Mount Dora FL
Posts: 120
|
Re: 250 manifold vacuum ports differences
Ordered this from Summit.
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Aug 2012
Location: Mount Dora FL
Posts: 120
|
Re: 250 manifold vacuum ports differences
Installed new vacuum port fitting and everything is working as it should!
![]() |
![]() |
![]() |
![]() |
#11 |
Check The Champ, Demonstrator
![]() Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: 250 manifold vacuum ports differences
Great, would you have the Summit part # handy for someone else to reference?
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Aug 2012
Location: Mount Dora FL
Posts: 120
|
Re: 250 manifold vacuum ports differences
Classic Performance IN38V60-C - Classic Performance Vacuum Fittings and Assortment Kits
Summit Part Number: CLP-IN38V60-C |
![]() |
![]() |
![]() |
#13 |
Post Whore
![]() Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: 250 manifold vacuum ports differences
Good stuff to know.
![]()
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Aug 2012
Location: Mount Dora FL
Posts: 120
|
Installed
Posted via Mobile Device |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|