|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-04-2016, 06:28 PM
|
#1 |
|
Registered User
Join Date: Dec 2014
Location: McDonough, Ga
Posts: 87
|
What kind of clutch kit do I need?
I need a clutch kit for my '68 C10 with Inline 6 (250). Does anyone know if the 1 in this link will work, or have a suggestion? Parts store sells a 10" & 11". I'm guessing 11" is for the trucks? Thanks.
http://www.ebay.com/itm/331418252537...%3AMEBIDX%3AIT
__________________
'68 Chevy C10 '06 Saleen Mustang #725 (Convertible)  '04 Infiniti G35 '01 Infiniti QX4 |
|
|
|
04-05-2016, 01:23 AM
|
#2 |
|
Registered User
Join Date: Dec 2009
Location: El Dorado Ca
Posts: 3,374
|
Re: What kind of clutch kit do I need?
the one on ebay is 11", says it is for trucks with a 307 engine, I have seen 12" clutches in 350's, you won't know for sure what is on your inline 6 until you pull it apart to see what size your flywheel is
|
|
|
|
|
04-05-2016, 08:16 PM
|
#3 |
|
Registered User
Join Date: Dec 2014
Location: McDonough, Ga
Posts: 87
|
Re: What kind of clutch kit do I need?
 what do you think? 11"?
__________________
'68 Chevy C10 '06 Saleen Mustang #725 (Convertible) '04 Infiniti G35 '01 Infiniti QX4 |
|
|
|
|
04-06-2016, 01:01 AM
|
#4 |
|
Registered User
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
|
Re: What kind of clutch kit do I need?
Guessing is a bad way to buy parts...
Original equipment clutch disc/plate on a 68 250 C10 CS148_ _ _ _ _ _ _ was 10". The cover measures ~12-1/2" (12-31/64"). There was an optional 11" clutch (cover measures ~13-3/4"), its RPO M01 which would be on the SPID. V8 CE trucks used the 11" clutch as standard equipment.
__________________
Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID ** Blazer SPID ** Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders ** Do you have a 1972 Plaid Pickup? ** Plaid Blazer ** Plaid Suburban Last edited by SS Tim; 04-06-2016 at 03:24 AM. |
|
|
|
|
04-06-2016, 01:59 AM
|
#5 |
|
Registered User
Join Date: Dec 2009
Location: El Dorado Ca
Posts: 3,374
|
Re: What kind of clutch kit do I need?
It looks like an 11" clutch should work, I can take a look at some of the parts,flywheels,clutches I have and let you know what I come up with,will let you know tomorrow......now that I know what flywheel you have
|
|
|
|
|
04-07-2016, 01:16 AM
|
#6 |
|
Registered User
Join Date: Dec 2009
Location: El Dorado Ca
Posts: 3,374
|
Re: What kind of clutch kit do I need?
I checked my flywheels and clutches, the flywheel you have takes a 12" clutch,I don't know how much you know about installing a clutch, but make sure you install the disc plate correctly, one side should be marked "flywheel side"...
|
|
|
|
|
04-07-2016, 10:58 AM
|
#7 |
|
Senior Member
 
Join Date: Oct 2009
Location: Godley, TX
Posts: 17,975
|
Re: What kind of clutch kit do I need?
Recommend take the flywheel with you to a parts store and make sure the pressure plate bolts up correctly. Assume you're going to buy a clutch and pressure plate together? As long as the pressure plate bolts on correctly - then you can be confident you have the right size corresponding disk. I would not buy this thru the mail unless you know exactly what you want - and that you have original size flywheel.
|
|
|
|
|
04-09-2016, 08:19 AM
|
#8 |
|
Registered User
Join Date: Dec 2014
Location: McDonough, Ga
Posts: 87
|
Re: What kind of clutch kit do I need?
She was a 10" ....thanks for the help
__________________
'68 Chevy C10 '06 Saleen Mustang #725 (Convertible) '04 Infiniti G35 '01 Infiniti QX4 |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
