![]() |
![]() |
#1 |
Registered User
Join Date: Apr 2016
Location: Sacramento, CA
Posts: 2
|
![]()
I have been rewiring my Brother-In-Laws truck since all the wires were cut and non-functional.
I am down to one wire that I cannot find in the shop manual or 85 wiring diagrams. Wire appears to ground at the ash tray housing/dash with a light bulb on the other end of the wire. Just guessing, I would say that it goes to 1. Radio 2. Heater/AC Control but can't find a position for it. I guess it could go to the Instrument Cluster but again, what position. I have added a picture. If you can tell me where the light goes would be of great assistance., Thanks in advance |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: May 2009
Location: Good Thunder Mn.
Posts: 955
|
Re: 1985 K10 4x4 question
I'm pretty sure that it is a fiber optic. I believe that the bulb goes in the upper right hand corner of the dash cluster, and when you're lights are on it gives your ash tray a little light.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2016
Location: Sacramento, CA
Posts: 2
|
Re: 1985 K10 4x4 question
Thanks for the input.
To verify location, I have posted a picture of the back of the cluster with arrow. If correct, please respond with a yes or no. Again, Thanks. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2009
Location: Good Thunder Mn.
Posts: 955
|
Re: 1985 K10 4x4 question
Yep, I believe that is where it's hooked up in my truck.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|