Heavy duty crew cab rocker panels?

[Diesel3+3]

I've got an 87 Crew cab which needs rockers. Living in the north east and concerned about rust. Who makes crew cab rockers in the thickest gauge material? Thanks

[daddyjeep]

for a complete rocker...nobody makes them from what I could find. You can get slip on rockers for the crew cab, but they do not extend into the door sill. I bought 2 sets of regular cab rockers and modified them to fit the rear door.

[IMG][/IMG]

[Diesel3+3]

Where did you get them from. We're they equivalent to that of the factory sheet metal?

[daddyjeep]

I got them from a local auto body Supply place to avoid the shipping cost from LMC or Brothers. I didn't measure the thickness, but it is very similar to factory material.

[barry1982]

I just did the inner/ outer rockers, and inner/outer cab corners on my 82 regular cab. Try find a distributor for "Key Parts" . I was surprised how heavy the panels were, and believe they are as thick, or slightly thicker than original equipment.

[andrewmp6]

Use weld through primer on the inside of the rockers and under coating on the back side once you get them welded in.