Visor and Visor Bracket Screws - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BrianG · 06-14-2016, 10:14 AM

I plan on running to the hardware store to get the screws for the visor and visor clips. This is for a 69 K-10. Does anyone know which size these should be. I plan on buying either Stainless or black, depending on what they have in stock. I know they are a Phillips head type of screw, but I need the length and size/gauge please.

**Grumpy old man** · 06-14-2016, 10:37 AM

#8 3/4" Phillips oval head or #10 with an 8 head if the holes are loose. stainless don't come in oval head , try ace hardware

BrianG · 06-14-2016, 10:43 AM

Quote:

Originally Posted by Grumpy old man

#8 3/4" Phillips oval head or #10 with an 8 head if the holes are loose. stainless don't come in oval head , try ace hardware

Thank you for the quick reply. Do both the visors and the visor clips use the same screw then? for some reason I thought maybe they were different.

**Grumpy old man** · 06-14-2016, 10:52 AM

Pretty sure there the same , just buy a couple longer there cheap like .10 buy a hand full

06-14-2016, 10:37 AM	#2
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Visor and Visor Bracket Screws #8 3/4" Phillips oval head or #10 with an 8 head if the holes are loose. stainless don't come in oval head , try ace hardware __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

06-14-2016, 10:52 AM	#4
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Visor and Visor Bracket Screws Pretty sure there the same , just buy a couple longer there cheap like .10 buy a hand full __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-14-2016, 10:14 AM	#1
BrianG Registered User Join Date: May 2011 Location: Oakley, Michigan Posts: 735	Visor and Visor Bracket Screws I plan on running to the hardware store to get the screws for the visor and visor clips. This is for a 69 K-10. Does anyone know which size these should be. I plan on buying either Stainless or black, depending on what they have in stock. I know they are a Phillips head type of screw, but I need the length and size/gauge please.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.