CA WTB Adapter For NP205 to Th400 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**4x41971SWB** · 07-11-2016, 10:02 PM

Let me Know what you have, condition, pictures, Price with shipping & PP.
Thanks

**special-K** · 07-12-2016, 08:48 AM

You might consider posting in the 73-87 parts board, as these transfer cases use a different bolt pattern than the ones that mount the TH400. TH400s never came in these trucks, but did in the area I suggested you look.

**praisegeetarman** · 07-12-2016, 10:10 AM

Not mine, but I saw this.

http://salem.craigslist.org/pts/5639551288.html

**4x41971SWB** · 07-12-2016, 12:01 PM

Quote:

Originally Posted by praisegeetarman

Not mine, but I saw this.

http://salem.craigslist.org/pts/5639551288.html

Thanks,
I`ll check it out.

**A1971Blazer** · 07-12-2016, 01:30 PM

Quote:

Originally Posted by 4x41971SWB

Let me Know what you have, condition, pictures, Price with shipping & PP.
Thanks

Do you need the "figure 8" on the NP205 side? I may have one.....

dennis7222 · 07-12-2016, 03:55 PM

If he does'nt want it, please let me know, I'm looking for one too! Thanks, Dennis 765-522-7222

**4x41971SWB** · 07-12-2016, 06:23 PM

Quote:

Originally Posted by A1971Blazer

Do you need the "figure 8" on the NP205 side? I may have one.....

Yes Figure 8

**A1971Blazer** · 07-12-2016, 07:21 PM

OK.......I found it......in very good shape....I bead blasted it a little to get the surface rust off....threads are good

Old seal is still installed in it (needs replaced)

Name: IMG_0308.jpg
Views: 88
Size: 30.5 KB

Name: IMG_0308.jpg
Views: 88
Size: 30.5 KB

That's some leftover silicone around the holes

Name: IMG_0309.jpg
Views: 91
Size: 34.3 KB

Here's the deal..........I was originally going to adapt a 4L60E to my NP205, when I tore the 205 down to rebuild it.....it had several parts that were going to need replaced....so I abandoned it and opted for a 241C.....

I was really hungry for an adapter and I paid way too much for this one.....but......that's water under the bridge......my bad.

AA sells the same adapter for around $260.....it's a reproduction and I'm sure it's a very good quality...I have used their stuff quite a bit....never had any issues....

I looked up your zip (guessed) 92025...? UPS ground ship would be $35.00...

SO....after all that long winded BS.....I will take $250 and I will pay the shipping and PP fees.....at this point I don't have a use for it anyway...

Let me know....thanks!

**4x41971SWB** · 07-12-2016, 08:49 PM

Quote:

Originally Posted by A1971Blazer

OK.......I found it......in very good shape....I bead blasted it a little to get the surface rust off....threads are good

Old seal is still installed in it (needs replaced)

Attachment 1552004

That's some leftover silicone around the holes

Attachment 1552005

Here's the deal..........I was originally going to adapt a 4L60E to my NP205, when I tore the 205 down to rebuild it.....it had several parts that were going to need replaced....so I abandoned it and opted for a 241C.....

I was really hungry for an adapter and I paid way too much for this one.....but......that's water under the bridge......my bad.

AA sells the same adapter for around $260.....it's a reproduction and I'm sure it's a very good quality...I have used their stuff quite a bit....never had any issues....

I looked up your zip (guessed) 92025...? UPS ground ship would be $35.00...

SO....after all that long winded BS.....I will take $250 and I will pay the shipping and PP fees.....at this point I don't have a use for it anyway...

Let me know....thanks!

I`ll Take it as long as its as you describe with all bolt threads in good condition.
Thanks

**4x41971SWB** · 07-12-2016, 08:52 PM

PM sent

**4x41971SWB** · 07-12-2016, 08:59 PM

Quote:

Originally Posted by A1971Blazer

OK.......I found it......in very good shape....I bead blasted it a little to get the surface rust off....threads are good

Old seal is still installed in it (needs replaced)

Attachment 1552004

That's some leftover silicone around the holes

Attachment 1552005

Here's the deal..........I was originally going to adapt a 4L60E to my NP205, when I tore the 205 down to rebuild it.....it had several parts that were going to need replaced....so I abandoned it and opted for a 241C.....

I was really hungry for an adapter and I paid way too much for this one.....but......that's water under the bridge......my bad.

AA sells the same adapter for around $260.....it's a reproduction and I'm sure it's a very good quality...I have used their stuff quite a bit....never had any issues....

I looked up your zip (guessed) 92025...? UPS ground ship would be $35.00...

SO....after all that long winded BS.....I will take $250 and I will pay the shipping and PP fees.....at this point I don't have a use for it anyway...

Let me know....thanks!

PM sent

**A1971Blazer** · 07-12-2016, 09:23 PM

Quote:

Originally Posted by 4x41971SWB

I`ll Take it as long as its as you describe with all bolt threads in good condition.
Thanks

Threads guaranteed to be good.....I will blast it clean all over, run a tap thru the threads to clean them out, and zinc chromate primer it for you......will reply to your PM......thanks...enjoy!

**4x41971SWB** · 07-12-2016, 10:00 PM

Quote:

Originally Posted by A1971Blazer

Threads guaranteed to be good.....I will blast it clean all over, run a tap thru the threads to clean them out, and zinc chromate primer it for you......will reply to your PM......thanks...enjoy!

Payment sent.
Thanks
Chris

07-11-2016, 10:02 PM	#1
4x41971SWB Senior Member Join Date: May 2016 Location: Escondido CA Posts: 574	WTB Adapter For NP205 to Th400 Let me Know what you have, condition, pictures, Price with shipping & PP. Thanks

07-12-2016, 08:48 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: WTB Adapter For NP205 to Th400 You might consider posting in the 73-87 parts board, as these transfer cases use a different bolt pattern than the ones that mount the TH400. TH400s never came in these trucks, but did in the area I suggested you look. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-12-2016, 10:10 AM	#3
praisegeetarman Senior Member Join Date: Feb 2010 Location: Harrah, Washington Posts: 323	Re: WTB Adapter For NP205 to Th400 Not mine, but I saw this. http://salem.craigslist.org/pts/5639551288.html __________________ 71 Blazer 4X4 (unmolested, all original (including paint) 74,000 mile barn find) 67 Camaro RS SS (unmolested, all original (including paint) 81,000 mile barn find) Keith Riel

07-12-2016, 03:55 PM	#6
dennis7222 Registered User Join Date: Jan 2014 Location: Roachdale IN Posts: 51	Re: WTB Adapter For NP205 to Th400 If he does'nt want it, please let me know, I'm looking for one too! Thanks, Dennis 765-522-7222

07-12-2016, 07:21 PM	#8
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,141	Re: WTB Adapter For NP205 to Th400 OK.......I found it......in very good shape....I bead blasted it a little to get the surface rust off....threads are good Old seal is still installed in it (needs replaced) That's some leftover silicone around the holes Here's the deal..........I was originally going to adapt a 4L60E to my NP205, when I tore the 205 down to rebuild it.....it had several parts that were going to need replaced....so I abandoned it and opted for a 241C..... I was really hungry for an adapter and I paid way too much for this one.....but......that's water under the bridge......my bad. AA sells the same adapter for around $260.....it's a reproduction and I'm sure it's a very good quality...I have used their stuff quite a bit....never had any issues.... I looked up your zip (guessed) 92025...? UPS ground ship would be $35.00... SO....after all that long winded BS.....I will take $250 and I will pay the shipping and PP fees.....at this point I don't have a use for it anyway... Let me know....thanks! __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer .............

07-12-2016, 08:52 PM	#10
4x41971SWB Senior Member Join Date: May 2016 Location: Escondido CA Posts: 574	Re: WTB Adapter For NP205 to Th400 PM sent

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.