67-72 cab corner 6x9 speaker brackets

[un4gvn!]

Originally Posted by Pro Performance

I will know more this weekend. Got sidetracked with work and shows. Just got back and now have a weekend. From my first inspection, they seem to fit Ok, with the bottom needing tobe trimmed off at an angle. I am going to take some more measurements and mock up cardboard, then cut. If I can leave a small piece I can fold over, it will allow an attaching point at the bottom.

I bought a set some time ago. I installed mine in a 69 cst10 about a month ago. Mine must of been for the early year trucks, because it was short at the bottom by one inch. I made it work. I made longer brackets to anchor it to the floor. It worked out great for the wiring. I bought a Kenwood stereo system, door speakers, 6x9s, amp, woofer, whole nine yards. I put down sound deadener even on the back of the speaker brackets. Before I cut my doors, I played the stereo with just the 6x9s and it sound awesome. My stereo volume goes up to 40. I never go pass 30 and it is super loud. I decided not to cut my doors or use the amp and woofer. I'm 55 years old and with just the 6x9s is good enough for me.