Looking at this... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BIGDOGTRUCKER · 07-20-2016, 04:33 PM

Guy I know in his mid 70's has this "69 C10 his dad bought new! Super straight/solid GA truck. Needs to be saved ASAP! Wondering what the value may be as she sits??? He thinks it had a big block when new, has a small block now(how to find out?). Still has bias ply tires!

Graham57a · 07-20-2016, 04:40 PM

Cool truck! If it had a big block it would have a high hump trans tunnel in the center of the cab, it would also mention it on the SPID. As for value, it's hard to say from those pictures. Looks like 2,500-3,000 if it doesn't need a ton of work. Let me know if you pass, I may be interested

BIGDOGTRUCKER · 07-20-2016, 04:44 PM

I have first crack at it, amazing how solid it is for being parked in the woods the last few years! Super straight too...He's asking 2K.

**jerry moss** · 07-20-2016, 10:03 PM

2K sounds fair if it's solid

projectking · 07-20-2016, 10:07 PM

I'd give 2k for it and take him to lunch!

cypressbog · 07-21-2016, 12:40 PM

Yes, $2K is a great deal!

Graham57a · 07-21-2016, 03:54 PM

Quote:

Originally Posted by BIGDOGTRUCKER

I have first crack at it, amazing how solid it is for being parked in the woods the last few years! Super straight too...He's asking 2K.

I would certainly get it, especially for 2k. Does it run? I'm sure it did when parked but I would verify that the motor turns over and doesn't have a rats nest on the carb. Sweet truck for sure! Always cool finding an original owner truck, they are getting fewer and far beween

frenchy51 · 07-21-2016, 05:27 PM

From the pictures it doesn't look like a lot of rust? Nice having original paint! I'd saw 2K is a really good price if not rusted out. Body work is PRICEY.
If the driver side is as straight as the pass. side-Go For It-NOW
engine-trans are cheap

**68bowtie** · 07-21-2016, 06:26 PM

about 30 hours of elbow grease and that thing will look like a champ. i like it.

In The Ten Ring · 07-21-2016, 06:39 PM

Oh yes, check and see if the crankshaft will turn and what the carburator looks like inside the air cleaner, it would help if it would at least roll, you have some good things there....lwb and a tool box.

I'm not a big fan of automatics but it's not for me it's for you, so, try those things out and the other members' advice and go get it.

hugger6933 · 07-21-2016, 09:17 PM

Bigblock would have factory hangers on both sides of the frame for duals. High hump as has been said also there might be a hole in the left inner fender where the power steering res was.

**GR8-68** · 07-22-2016, 07:19 AM

You haven't gotten it home yet !! ??

Any verdict ?

**GAc10boy** · 07-22-2016, 02:53 PM

Cool truck! Let me know if you pass on it. I'm in Marietta and have an affinity for medium olive c10s.

**special-K** · 07-23-2016, 07:51 AM

If it's original paint there should be holes under the fender badge for the optional 396 emblem. Looks like a 307 base truck with 2-tone to me. Still a great truck!

07-20-2016, 04:33 PM	#1
BIGDOGTRUCKER Registered User Join Date: Oct 2013 Location: Northeast GA Posts: 41	Looking at this... Guy I know in his mid 70's has this "69 C10 his dad bought new! Super straight/solid GA truck. Needs to be saved ASAP! Wondering what the value may be as she sits??? He thinks it had a big block when new, has a small block now(how to find out?). Still has bias ply tires! Attached Images

07-20-2016, 04:40 PM	#2
Graham57a Registered User Join Date: Aug 2010 Location: Asheville, North Carolina Posts: 1,839	Re: Looking at this... Cool truck! If it had a big block it would have a high hump trans tunnel in the center of the cab, it would also mention it on the SPID. As for value, it's hard to say from those pictures. Looks like 2,500-3,000 if it doesn't need a ton of work. Let me know if you pass, I may be interested __________________ ANDREW 1972 Chevy SWB Cheyenne Super JANE http://67-72chevytrucks.com/vboard/s...d.php?t=462072 1972 GMC Jimmy PENNY http://67-72chevytrucks.com/vboard/s...d.php?t=735827 1968 GMC patina swb PEARL http://67-72chevytrucks.com/vboard/s...d.php?t=731315 1972 Chevy K20 BRUCE http://67-72chevytrucks.com/vboard/s...d.php?t=805788 1972 Chevy SWB Highlander OLIVE Build thread coming

07-20-2016, 04:44 PM	#3
BIGDOGTRUCKER Registered User Join Date: Oct 2013 Location: Northeast GA Posts: 41	Re: Looking at this... I have first crack at it, amazing how solid it is for being parked in the woods the last few years! Super straight too...He's asking 2K.

07-20-2016, 10:03 PM	#4
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,855	Re: Looking at this... 2K sounds fair if it's solid __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

07-20-2016, 10:07 PM	#5
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Looking at this... I'd give 2k for it and take him to lunch! __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

07-21-2016, 12:40 PM	#6
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: Looking at this... Yes, $2K is a great deal!

07-21-2016, 05:27 PM	#8
frenchy51 Registered User Join Date: Jun 2014 Location: Orland, Nor-Cal Posts: 617	Re: Looking at this... From the pictures it doesn't look like a lot of rust? Nice having original paint! I'd saw 2K is a really good price if not rusted out. Body work is PRICEY. If the driver side is as straight as the pass. side-Go For It-NOW engine-trans are cheap __________________ 1972 Highlander PAC B 400BB-SOLD 1974 K5 Blazer-6.0 swap 1974 C20 Long Bed 454 1977 GMC HeavyHalf several adopted orphans

07-21-2016, 06:26 PM	#9
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,584	Re: Looking at this... about 30 hours of elbow grease and that thing will look like a champ. i like it. __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Survivor "Lil’ Mint" (67 c10 40k mile light green original paint) Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

07-21-2016, 06:39 PM	#10
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: Looking at this... Oh yes, check and see if the crankshaft will turn and what the carburator looks like inside the air cleaner, it would help if it would at least roll, you have some good things there....lwb and a tool box. I'm not a big fan of automatics but it's not for me it's for you, so, try those things out and the other members' advice and go get it.

07-21-2016, 09:17 PM	#11
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,261	Re: Looking at this... Bigblock would have factory hangers on both sides of the frame for duals. High hump as has been said also there might be a hole in the left inner fender where the power steering res was.

07-22-2016, 07:19 AM	#12
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: Looking at this... You haven't gotten it home yet !! ?? Any verdict ? __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

07-22-2016, 02:53 PM	#13
GAc10boy Senior Member Join Date: Oct 2013 Location: Marietta, GA Posts: 1,642	Re: Looking at this... Cool truck! Let me know if you pass on it. I'm in Marietta and have an affinity for medium olive c10s. __________________ - Robbie UNITED BY TRUCKS - classic truck video content YouTube: www.youtube.com/c/unitedbytrucks Instagram: @united_by_trucks Paw Paw '68 508 Dark Blue Custom C10 Teddy '68 GMC SWB 503 Light Green LS Build Mississippi Mud '75 Skyline Blue Patina SBC Build

07-23-2016, 07:51 AM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Looking at this... If it's original paint there should be holes under the fender badge for the optional 396 emblem. Looks like a 307 base truck with 2-tone to me. Still a great truck! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.