KS Spark plug heat shields and wire retainers and brackets for 350

[RogerKoop]

Originally Posted by blue69

I'll take a set. Please PM PayPal info

Payment received and has been shipped.

[RogerKoop]

one set shipped to blue69

[orbit 433]

Roger Do you have another set and would like a set of non dated wires as well. Please let me know.
Joe

[Steven R]

Pm sent Would like a set if possible,

but need some info. Explained in PM

[Chevy Fan Always]

Do you happen to have any more. The plug shields mainly but would take a whole set?

Mike Wilson
Posted via Mobile Device

[RogerKoop]

Originally Posted by Chevy Fan Always

Do you happen to have any more. The plug shields mainly but would take a whole set?

Mike Wilson
Posted via Mobile Device

I'll check and see if I have a spare set of plug shields.

[Chevy Fan Always]

Originally Posted by RogerKoop

I'll check and see if I have a spare set of plug shields.

Thanks
Posted via Mobile Device

[RogerKoop]

Originally Posted by RogerKoop

I'll check and see if I have a spare set of plug shields.

I scanned a pic from a 1967 corvette assembly manual that shows the spark plug routing with brackets. Does this answer your questions?

[orbit 433]

Thank you
Posted via Mobile Device

[Steven R]

Attn Roger, I sent a PM Have you received it? Pls contact me. I would like to find a way to make payment to you.

steven rempel

[RogerKoop]

Originally Posted by Steven R

Attn Roger, I sent a PM Have you received it? Pls contact me. I would like to find a way to make payment to you.

steven rempel

Yes I got your PM and sent you an email from paypal. did you get it?

[Steven R]

got your pm i am still having issues... sent reply pm I feel so bad and cant get paypal to help me get this to work

[Chevy Fan Always]

Hello Roger.

I am looking for two shields that go over the temp senders and plugs, any condition would work, I can beadblast and paint. Also looking for a bracket that holds the trans cooling lines. It bolts up to an oil pan bolt. I have one on my original 72 but have not seen one online.Thanks

Mike Wilson 419-651-2785

[RogerKoop]

Originally Posted by Chevy Fan Always

Hello Roger.

I am looking for two shields that go over the temp senders and plugs, any condition would work, I can beadblast and paint. Also looking for a bracket that holds the trans cooling lines. It bolts up to an oil pan bolt. I have one on my original 72 but have not seen one online.Thanks

Mike Wilson 419-651-2785

I don't have any extra shields at this time. I may have the bracket that holds the trans cooling lines, but will need to look.

[RogerKoop]

I have 2 more sets for sale.

I have some sets of spark plug heat shields and plug wire retainers with brackets for sale. The heat shield for the temp wire was media blasted and re-cadmium plated. The other 3 are reproductions. The 4 piece set of 2 wire retainers are re-cadmium plated as well. I've included a turbo 350 detent bracket. All the other brackets were media blasted and the ones with spark plug wire holes were also re-coated. I have 2 drivers side brackets, only one is needed so pick the one you would like.

Price is $125.00 each shipped.

I accept MO or Checks.

[junkcarguy]

Originally Posted by JimH2828

I have a 70 Blazer with a 350 and am not running a coil, have an HEI Dist. I was looking for black, thick gauge 8mm, 90 bend cap side and straight or 90 bend plug side, under the exhaust manifold cables.

Am I headed in the right direction? Suggestions?

Thanks
Jim

1975 corvette wires are hei and the correct length if you don't want to make custom ones

[Oddfire]

Roger i have 2 maybe 3 sets of the heat shields & maybe a few of the wirelooms in my stash somewhere if you're interested. They range from very good to fair condition. Will need to be cleaned & blasted of course before cadium plating. PM me if interested. Jamie71Longhorn