I need help identifying some Brackets

[Elliot949]

I need help identifying the following brackets...



BRACKET 1








BRACKET 2






BRACKET 3





BRACKET 4





BRACKET 5

[notsolo]

Bracket #2 is 60,s alternator to manifold drivers side. There were no accessories holes in the heads.

[Elliot949]

Originally Posted by notsolo

Bracket #2 is 60,s alternator to manifold drivers side. There were no accessories holes in the heads.

Thanks... That is what I thought that one was...

[100%Chevy]

#4 is the rear power steering bracket for a 66 Chevy car.
# 2 is lower alternator bracket for a 65/66 Chevy car also.
#3 is the lower alternator bracket for heads with mounting holes.The hole has been cut off the long end.
I have #1 but don't remember what it's for.
#5 looks to be modified.Not sure what it's for.
Mike.

[Elliot949]

Originally Posted by 100%Chevy

#4 is the rear power steering bracket for a 66 Chevy car.
# 2 is lower alternator bracket for a 65/66 Chevy car also.
#3 is the lower alternator bracket for heads with mounting holes.The hole has been cut off the long end.
I have #1 but don't remember what it's for.
#5 looks to be modified.Not sure what it's for.
Mike.

Thanks Mike... The only thing I know is these came off of my 327 Truck motor... But it has been so long since I took them off that I just don't remember...

[100%Chevy]

O.k.,now that I've thought about for a while,I believe that #5 is the bracket that mounts on the frame for ram assisted power steering for 60/67 trucks and earlier cars.It holds the end of the cylinder,the other end of which mounts to the draglink.
#1 looks like it might be a passenger side A.I.R. pump mount(this is a guess).
I don't mean to sound like a know it all.I have a lot of 60's cars and trucks and a huge pile of brackets that I don't know what they are for.I'm constantly trying to find what fits what.
I also have a lot of pulleys too.Same problem!
Someone needs to start a web-site just on engine accessories!
Mike./

[Elliot949]

[QUOTE=100%Chevy;7676524]O.k.,now that I've thought about for a while,I believe that #5 is the bracket that mounts on the frame for ram assisted power steering for 60/67 trucks and earlier cars.It holds the end of the cylinder,the other end of which mounts to the draglink.
#1 looks like it might be a passenger side A.I.R. pump mount(this is a guess).
I don't mean to sound like a know it all.I have a lot of 60's cars and trucks and a huge pile of brackets that I don't know what they are for.I'm constantly trying to find what fits what.
I also have a lot of pulleys too.Same problem!
Someone needs to start a web-site just on engine accessories!
Mike./[/QUOTE

Your guess on that #5Is dead on... now that yiu said that it rings a bell]