![]() |
![]() |
#1 |
Registered User
Join Date: Feb 2013
Location: sherman oaks
Posts: 70
|
6.5" van rally's
I have a 69 gmc and need to know if 6.5" van rally's will fit in front if using 2 1/2" drop spindles? Thought i remember hearing there was possible issues with this. thanks
|
![]() |
![]() |
![]() |
#2 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Re: 6.5" van rally's
If you have an issue, it will likely be a matter of trimming the outer edge of the lower A-arm or clearance.....longhorn
![]()
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
![]() |
![]() |
![]() |
#3 |
67-72 parts collector,…
![]() Join Date: Nov 2002
Location: Mid-MO
Posts: 22,699
|
Re: 6.5" van rally's
Edit:crazy longhorn types faster than me. Ha
They have a 4" backspace just like the 15x8 rally wheels. You might have to trim the lower a-arm on both sides of the lower balljoint. No big deal. 10 minutes per side with a grinder and a cut-off wheel.
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
![]() |
![]() |
![]() |
#4 | |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Re: 6.5" van rally's
Quote:
![]()
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Feb 2013
Location: sherman oaks
Posts: 70
|
Re: 6.5" van rally's
would any modifications be required if i find 15 x 7 rally's and use those instead?
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Oct 2013
Location: Alabama
Posts: 1,221
|
Re: 6.5" van rally's
i have 6.5" van rallies mounted on Early Classic Ent. 2 1/2" drop spindles and it's also on air bags with NO rubbing issues and NO trimming.
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Oct 2013
Location: Alabama
Posts: 1,221
|
Re: 6.5" van rally's
|
![]() |
![]() |
![]() |
#8 |
67-72 parts collector,…
![]() Join Date: Nov 2002
Location: Mid-MO
Posts: 22,699
|
Re: 6.5" van rally's
15x7's have a 3-5/8" backspace.
I still trim the a-arms so all wheels will fit. Depending on how bulky the spindle castings are, some people even have to clearance the outer tie rod arm of the spindle..
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Feb 2013
Location: sherman oaks
Posts: 70
|
Re: 6.5" van rally's
guess ill have to do that then if they rub. thanks
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|