C 30 9 foot Bed Drawings

[c20 diesel]

I have a C30 133 wheel base. missing the 9 foot step side bed, have not been able to find a 9 footer.
Belonged to the city when new. had a service body. when I bought the C30 with no bed. Tried to put a fleet side long, most lined up good 6 inches to short in front. added 6 inches to the front don't look to bad.
Question how do I tell if Factory cab chassis, or was the bed removed &
replaced with a Service body.
At one time I founded factory drawings [prints],on the internet got lost For the 9 foot step side bed not been able to find drawings.on the net again
I think I can build the be.
Need to find drawings or get 9 foot measurment.

[jdl71]

The drawings may have been in the Assembly manual. I have one but not by my side at the moment. What year? I was thinking the VIN would indicate cab and chassis or pickup.

[jdl71]

VIN Decoding

[c20 diesel]

The c30 is a 65 model 10,000 GVW
The vin decoding I have found For 65 , most go to 3/4 ton
not much on 10,000 GVW 133 wheel base.

Thank you c20 diesel

[cv65]

there are some measurements here scroll down to c30 section https://www.gmheritagecenter.com/doc...olet-Truck.pdf

[aerotruk63]

9 foot boxes only came Stepside. A fast way of telling is it has 4 stake pockets per side. 8ft. box has 3 per side and the 6 1/2ft box has two stake pockets per side.

[everetteladner]

You contacted me. But, I lost your message. I have a c30, Come by and take measurements