radio fit? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gerry giordano · 03-18-2004, 03:52 PM

Looking at a stock push button AM radio from a '72 GMC. Two questions: Will it fit a '69? Is the unit complete in one piece or is there some typr of bezel or faceplate required to fit it in the dash?

Thanks.

badpeanut · 03-18-2004, 04:03 PM

The radio will fit. Just make sure you get knobs and the metal cups behind the knobs which clamp the radio up to the dash (hold it in place); there are no other parts required.

gerry giordano · 03-18-2004, 05:23 PM

Thanks. GMC, Chevy- no difference, right?

bigvinnie · 03-18-2004, 05:24 PM

rite

03-18-2004, 03:52 PM	#1
gerry giordano Registered User Join Date: Sep 2003 Location: Arizona Posts: 44	radio fit? Looking at a stock push button AM radio from a '72 GMC. Two questions: Will it fit a '69? Is the unit complete in one piece or is there some typr of bezel or faceplate required to fit it in the dash? Thanks.

03-18-2004, 05:23 PM	#3
gerry giordano Registered User Join Date: Sep 2003 Location: Arizona Posts: 44	Thanks. GMC, Chevy- no difference, right? Last edited by gerry giordano; 03-18-2004 at 05:28 PM.

03-18-2004, 05:24 PM	#4
bigvinnie Registered User Join Date: Aug 2001 Location: escondido, ca 92026 Posts: 1,222	rite __________________ '72 short step, 350, 700R4, tilt, ps, pdb, a/c, lowered coils, etc., other work in progress... San Diego, CA 72 Stepside Project

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-18-2004, 04:03 PM	#2
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,759	The radio will fit. Just make sure you get knobs and the metal cups behind the knobs which clamp the radio up to the dash (hold it in place); there are no other parts required.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.