Rubber mats for rubber floor?? What to use?

[AnotherWs6]

My truck has a rubber floor instead of carpet, which I like. What I don't like is the fact that floor mats slide all over the place. I have some generic ones in there that were probably purchased from a WalMart etc. They have little rubber nipples that would work just fine on carpet but do nothing on top of rubber. Anybody know of anything that works?

[In The Ten Ring]

Interesting question!

Could you try some double sided tape under your overlying mats?

[AnotherWs6]

Dont think that would work well and if it did I would end up with sticky residue on my brand new rubber floor. And I know it would be covered but still......

[In The Ten Ring]

No adhesive can ever frighten a current or former ZEP Inc salesman.

I sometimes forget that not everyone has a few cans of Orange Gel Degreaser on hand. That stuff is amazing when it comes to dissolving old adhesive.

[AnotherWs6]

Start of a new week.....

[JustToxic]

Go to a Toyota dealer and ask for floor mat retainers and grommets. They have a two piece grommet that goes in the floor and then a retainer that clips into them. Then put a hole in the floor mat and it will clip into the retainer, its what Toyota uses on their vehicles. If I have time I'll look for part numbers and maybe some pictures.

[flashed]

I used 2 commercial carpet squares from one of our building projects ,they move a little but not bad .They are 2ft x2ft .

[JustToxic]

This is what I was talking about the retainers on the left and the 2 piece grommet is on the right. The two part numbers you would need are 58297-50020 and 08211-00720, any Toyota dealer should be able to get this for you.

[AnotherWs6]

Interesting, thanks.

[JustToxic]

Originally Posted by AnotherWs6

Interesting, thanks.

No problem, I have a rubber floor on my 2002 Chevy plow truck and put these in to keep the floor mats in place, works great.

[In The Ten Ring]

Originally Posted by JustToxic

This is what I was talking about the retainers on the left and the 2 piece grommet is on the right. The two part numbers you would need are 58297-50020 and 08211-00720, any Toyota dealer should be able to get this for you.

Oh, that is neat! Thanks.