65 GMC Ignition switch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bvmayor · 09-20-2016, 12:11 PM

Hello Guys,

I am trying to find a replacement ignition switch for our 65 GMC p/u. The ones I have ordered have been different than the original. The prongs on the one that came out of the truck match the plug on the harness which seems like it is original. There are five prongs coming out of the back of the switch. The ones I ordered to replace them have six prongs and they are in a different pattern.

I can't load pics but the pattern on the one that cam out of the truck has four prongs. Two are facing sideways, and two are running up and down....the replacements all have 5 or 6 prongs and they only have one of the prongs facing sideways relative to the others.

ANY HELP OR SUGGESTIONS??

1963c-10 · 09-20-2016, 01:01 PM

check out this thread.....may help

http://67-72chevytrucks.com/vboard/s...d.php?t=528310

slorio · 09-20-2016, 01:18 PM

Bv
Just ordered one from eBay for my GMC. Delco part number is 1116658. Last three digits of part number (658) are stamped in tab of switch if it is original. This switch has four terminals. Search that part number on eBay and you will see several available with pictures.

Hope that helps.
Regards
Steve
New Orleans

**dtkarst** · 09-20-2016, 02:08 PM

I used an ignition from a 66 chevelle on my 66 gmc and it worked. Matched right up

bvmayor · 10-04-2016, 01:52 PM

Thanks to all for helping....Got one from ebay and it works great.

JP

09-20-2016, 12:11 PM	#1
bvmayor Registered User Join Date: Aug 2015 Location: santa rosa, ca Posts: 30	65 GMC Ignition switch Hello Guys, I am trying to find a replacement ignition switch for our 65 GMC p/u. The ones I have ordered have been different than the original. The prongs on the one that came out of the truck match the plug on the harness which seems like it is original. There are five prongs coming out of the back of the switch. The ones I ordered to replace them have six prongs and they are in a different pattern. I can't load pics but the pattern on the one that cam out of the truck has four prongs. Two are facing sideways, and two are running up and down....the replacements all have 5 or 6 prongs and they only have one of the prongs facing sideways relative to the others. ANY HELP OR SUGGESTIONS??

09-20-2016, 01:01 PM	#2
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 65 GMC Ignition switch check out this thread.....may help http://67-72chevytrucks.com/vboard/s...d.php?t=528310 __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

09-20-2016, 01:18 PM	#3
slorio Registered User Join Date: Sep 2006 Location: Louisiana Posts: 374	Re: 65 GMC Ignition switch Bv Just ordered one from eBay for my GMC. Delco part number is 1116658. Last three digits of part number (658) are stamped in tab of switch if it is original. This switch has four terminals. Search that part number on eBay and you will see several available with pictures. Hope that helps. Regards Steve New Orleans

09-20-2016, 02:08 PM	#4
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,490	Re: 65 GMC Ignition switch I used an ignition from a 66 chevelle on my 66 gmc and it worked. Matched right up

10-04-2016, 01:52 PM	#5
bvmayor Registered User Join Date: Aug 2015 Location: santa rosa, ca Posts: 30	Re: 65 GMC Ignition switch Thanks to all for helping....Got one from ebay and it works great. JP

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.