1990 454ss original to supercharged wild truck

[simobones454]

Thanks jbjburbs, checked out the mich metal control arms ,look like really good product have to get in contact with them.

[maxxxy]

Awesome project! Subscribed!
Posted via Mobile Device

[simobones454]

put the new motor in, see how it sat and fitted, also to set up tailshaft and diff heights and degrees for the rear end. What we noticed is the 454ss chevy, the engine is 1.5 inchs to the passenger side U S A style,now i know why i had bugger all room when i converted it from left to right hand drive.So out with the welder again to make new engine mounts to center the engine.If i did'nt when the hat goes through the bonnet it would have all been off center.As it sits now the engine sits spot on. ( note 2 different size engine mounts)

[simobones454]

finally finished the 4 link, set up the bags 7" slam specialist as it sits in photos is in ride height , just need to finish all the pipe work and shocks. Next thing is a dummy run of installing the fuel cell , fuel pumps, filters, run fuel ,air and brake lines to see how it all works and looks. Also need to buy 2no 22" x 10 + 2no 22" x 8 wheels ,any feedback on dealers or stockists to talk to, would be appreciated. as the wooden wheels won't get me far, thanks

[bulldog2513]

beautiful work man. my build is nowhere near the extent of most peoples on here. i must say, seeing yours and some of the others makes me want to go buck wild with a torch and welder. im going to keep up with this one!

[Coursey]

Any updates?

[OutlawDrifter]

Coursey this thread is over 4 years old.

[Coursey]

Originally Posted by OutlawDrifter

Coursey this thread is over 4 years old.

I know that. Just thought the OP may have finished it and had an update. Thats all.

[OutlawDrifter]

He also hasn't logged on to the site in 4 years.