Twin Stick Shifter question

[Bigdav160]

My first issue with the JBC shifters is they mount straight up so they are well behind the OE hole in the floor. I bent mine to a 45 immediately above the rectangular bracket and then 45 again to bring them through the hole.

I still had to remove a little material from the back portion of the floor hole. Then, when the bench seat was moved forward it would sometimes bump the shifter into neutral.

Recently I cured the seat interference with buckets and a console. I'm terrible with a camera so don't hold the grainy pictures against me. It's functional now but the shifters are so much shorter after being bent. I'm terrible with a camera so don't hold the grainy pictures against me.