![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Mar 2011
Location: tulsa,ok.
Posts: 1,803
|
need some pictures please
ok so I'm looking at fitting my doors and fenders! I've seen the 5/32" measurement with a 1/4" gap at the bottom picture! So my questions are: does the door line up with the front edge of the rocker panel? and then there's a 5/32" gap from the edge of the door? the back of the door I can add to if need be!
so I guess I'm just asking if the door should line up with the front of the rocker panel or sits back 5/32"! my drivers door I got a 1/4" or so gap at the back of the door. but my passenger door I'm at the 5/32" measurement at the back edge of the door! some pictures and advise would be great, I know the gaps on these trucks are not great and that fitting the doors to the cab is common
__________________
my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163 |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Sep 2010
Location: Winchester Oregon, formerly Vancouver BC
Posts: 2,949
|
Re: need some pictures please
I don't have an answer but the door gaps suck unless you spend considerable time on them by adding and subtracting metal. I had a perfect original paint door and the gap along one edge varies by an 1/8".
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|