BOB, Oldrustyc10, better look - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**crossy** · 03-25-2004, 11:16 AM

Bob, since i can't remember which of your Emails doesn't work and i know you hang out here 24/7

I thought I better point this out because it is darn near in your back yard.
I'll take that 400,

DAVE

http://cgi.ebay.com/ebaymotors/ws/eB...&category=6783

DennyB · 03-25-2004, 11:44 AM

Hmmm, I might could use the chassis...

**crossy** · 03-25-2004, 11:59 AM

sorry, denny I always forget about you because you hang out with the 'old' truck guys .

A 3/4 ton 56 is cool! I might be intersted in any parts you DON'T need. DAVE

**old Rusty C10** · 03-25-2004, 01:22 PM

thanks dave im going to watch it and see how high it goes and maybe make a bid lol if the old lady dont seem homicidal when i tell her about it

DennyB · 03-27-2004, 12:09 AM

I would love to find a short half ton 4wd chassis.
Any of you Jersey guys know where I can get one?????

**crossy** · 03-27-2004, 12:19 AM

SURE! where were you when I needed to get rid of the Blazers. Anyway I run across thats sort of stuff but most guys don't get off the SWB trucks around here too easily. they are NO WHERE near as plentiful here as they are down south. I have a LWB 3/4 ton here that I would sell you only what you need for around $500. That's with matching 4.10 rears, good 33" tires, nice hubcaps and I can throw in some other items . You should just buy the whole thing for $950 and sell off all the stuff I have for it to guys on the boards .

, DAVE

DennyB · 03-27-2004, 01:36 AM

lol Dave.
A blazer won't work. Its wheel base is about 5-6" too short.
I would very much like a half ton. A short would be the best cause it may not need shortened. I may be able to use a long leaf spring to move the axel foward and improve the ride.
I'm looking for something to set my 56 on. Gona make it 4wd but I want it low with a nice ride.
I will probably have to use bag to accomplish this. I don't want to slam it, just want a good ride with good handling and 4wd to launch my boat and for that freek NJ snow storm.
Thats my plan...so far.

highboy_04 · 03-27-2004, 04:29 AM

you should find some sort of all wheel drive frame for it. that would be neat to see.

DennyB · 03-27-2004, 12:31 PM

Quote:

Originally posted by highboy_04
you should find some sort of all wheel drive frame for it. that would be neat to see.

Yea, That thought crossed my mind. Only problem is finding one that will take a 383 stroker.

Any ideas that wont break the bank?

highboy_04 · 03-27-2004, 03:37 PM

hmm i couldnt think of any that would hold a 383. i know a guy down the street from me that took an old toreno(spl?) front wheel drive frame and put it under a late 80s chevy truck. it had the oldsmobile big block in it.

03-25-2004, 11:16 AM	#1
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	BOB, Oldrustyc10, better look Bob, since i can't remember which of your Emails doesn't work and i know you hang out here 24/7 I thought I better point this out because it is darn near in your back yard. I'll take that 400, DAVE http://cgi.ebay.com/ebaymotors/ws/eB...&category=6783 __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

03-25-2004, 11:44 AM	#2
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Hmmm, I might could use the chassis... __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

03-25-2004, 11:59 AM	#3
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	sorry, denny I always forget about you because you hang out with the 'old' truck guys . A 3/4 ton 56 is cool! I might be intersted in any parts you DON'T need. DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

03-25-2004, 01:22 PM	#4
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	thanks dave im going to watch it and see how high it goes and maybe make a bid lol if the old lady dont seem homicidal when i tell her about it __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

03-27-2004, 12:09 AM	#5
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	I would love to find a short half ton 4wd chassis. Any of you Jersey guys know where I can get one????? __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

03-27-2004, 12:19 AM	#6
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	SURE! where were you when I needed to get rid of the Blazers. Anyway I run across thats sort of stuff but most guys don't get off the SWB trucks around here too easily. they are NO WHERE near as plentiful here as they are down south. I have a LWB 3/4 ton here that I would sell you only what you need for around $500. That's with matching 4.10 rears, good 33" tires, nice hubcaps and I can throw in some other items . You should just buy the whole thing for $950 and sell off all the stuff I have for it to guys on the boards . , DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

03-27-2004, 01:36 AM	#7
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	lol Dave. A blazer won't work. Its wheel base is about 5-6" too short. I would very much like a half ton. A short would be the best cause it may not need shortened. I may be able to use a long leaf spring to move the axel foward and improve the ride. I'm looking for something to set my 56 on. Gona make it 4wd but I want it low with a nice ride. I will probably have to use bag to accomplish this. I don't want to slam it, just want a good ride with good handling and 4wd to launch my boat and for that freek NJ snow storm. Thats my plan...so far. __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

03-27-2004, 04:29 AM	#8
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	you should find some sort of all wheel drive frame for it. that would be neat to see. __________________ '67 c10 350/th350

03-27-2004, 03:37 PM	#10
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	hmm i couldnt think of any that would hold a 383. i know a guy down the street from me that took an old toreno(spl?) front wheel drive frame and put it under a late 80s chevy truck. it had the oldsmobile big block in it. __________________ '67 c10 350/th350

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.