250 bellhousing into 292 inline 6

[D13]

Assuming your flywheel isn't cracked or loose, where is it hitting? If on the outer edge, then you probably have a 'small' clutch bell and need a 'large' clutch bell. Look for one from a 3/4 ton. Measure your flywheel and clutch for comparison.


I know the 3/4 tons use a larger clutch than cars, and that the lighter 1/2 tons use a smaller clutch too,. I'm betting that is wht is going on. If so you 'could' get around it by putting in the smaller clutch - odds are the flywheel is drilled for both.