85 GMC Sierra "Scarlett"

[N2TRUX]

Originally Posted by 87max

What PSI are you running? Possible that your new media is to heavy with not enough PSI to create a vacuum to pick it up? To aid in air consumption I swapped out the air nozzle to an 1/8npt to 1/8 barb fitting with tubing over the barb fitting to protect it. The nozzle was roughly 3/16. I didn't notice any loss of power blasting and compressor maintains higher pressure.

I'm at 140 psi on the gauge. I do suspect the media is to heavy, but the reviews I read have said good things. I tried going larger and smaller on the tip with no real change.