CA WTB 292 4x4 mount

[Short 3/4]

I'm looking for the pass side frame perch to mount a 292 in a 65 K10. Have the V8 version and also 2wd 292 parts I could throw in if that helps. Also, does anybody know if 67 or newer parts would work? Don't know if I should post on that forum as well. Thanks for any help

[KrazyRay]

There's a 63 4wd with a 6-292 at my local wrecking yard, but it looks tough to pull the 6 rivets that holds the bracket to the frame. Hopefully someone has a spare one for you.

[pimpston65]

theres one on the online auction site

[aotte1]

Do not think that looks like a 4x4 one.

Try a PM to "BLK65K10", he may have one?

Les

[Short 3/4]

Originally Posted by aotte1

Do not think that looks like a 4x4 one.

Try a PM to "BLK65K10", he may have one?

Les

Ya I think your right. Funny thing is it doesn't look like a 2wd one ether. I think its from a newer series. Thanks for the input and the contact suggestion.

[Short 3/4]

Originally Posted by KrazyRay

There's a 63 4wd with a 6-292 at my local wrecking yard, but it looks tough to pull the 6 rivets that holds the bracket to the frame. Hopefully someone has a spare one for you.

If you go back there anytime soon could you snap a picture or get me some contact info for the yard. Ya those rivets are a pain, it was no fun getting the V8 perch out of mine. Thanks for the help. If I don't find one on the forum it may be time for a Nor Cal road trip

[1960chevypanel]

I've taken them off at the junkyard. You'll need a cordless sawzall, cut the frame rails and work the rivets out later.

If you're real careful you can melt the rivet heads off with a torch and then knock them through.

[BLK65K10]

I have one already removed. $20 plus shipping. I will try and get a photo on here tomorrow. Thanks Lyle

[1960chevypanel]

Hey Lyle do you have any 63-66 4WD Suburban/panel rear frame extensions?

[BLK65K10]

[Short 3/4]

Originally Posted by BLK65K10

I have one already removed. $20 plus shipping. I will try and get a photo on here tomorrow. Thanks Lyle

I'll take it. If you can post a picture and let me know shipping to 93402 that will be great. Thanks Tom

[BLK65K10]

Originally Posted by 1960chevypanel

Hey Lyle do you have any 63-66 4WD Suburban/panel rear frame extensions?

Sorry I dont have any 4x4 suburban stuff. All my suburbans are 2wd and all my 4x4s are long box pickups.

[BLK65K10]

Originally Posted by Short 3/4

I'll take it. If you can post a picture and let me know shipping to 93402 that will be great. Thanks Tom

Picture us posted. I will figure shipping and let you know. Thanks Lyle

[Short 3/4]

Originally Posted by BLK65K10

I have one already removed. $20 plus shipping. I will try and get a photo on here tomorrow. Thanks Lyle

Sorry, didn't see that you already posted a picture. looks like the one I need.

[BLK65K10]

Looks like shipping is $14 for a total of $34 shipped. I will PM with payment info. THanks Lyle