MD 72 suburban sheetmetal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**richard2717** · 02-18-2017, 03:04 PM

This ad is only for the sheetmetal on the burb. Nothing else is for sale atthe moment. She is pretty rusty in a lot of places but there is still a lot of usable metal on it. Let me know what you need.

Prices start at $25 per cut plus shipping and go up from there depending on what you need. All the doors and rear gates are rusty

.

**richard2717** · 02-18-2017, 03:05 PM

6-10

**richard2717** · 02-18-2017, 03:06 PM

11-15

**richard2717** · 02-18-2017, 03:07 PM

16-20

*randy500* · 02-18-2017, 04:51 PM

RH "B" pillar to 98409?

**richard2717** · 02-18-2017, 05:18 PM

Quote:

Originally Posted by randy500

RH "B" pillar to 98409?

Randy
Take a look and see if it is good enough for what you need. Also let me know how close I can cut the top and bottom so I can get accurate shipping quote

Richard

.

**richard2717** · 02-18-2017, 07:21 PM

Almost completely cut apart. Let me know what you need. Broke my only sawzall blade.

Even got the plywood out without damage. Only the little pc up front passenger side was no good

.

*randy500* · 02-18-2017, 08:59 PM

The way you have it cut is fine, for shipping cut it again someplace between the upper hinge and the raised portion between the doors.

*randy500* · 02-18-2017, 09:04 PM

I also just parted one of these and had some interest in the frame body mounts and rear frame section so keep that in mind when scrapping it.

What do you want for that exhaust hangar at the far rear and are there any over the rear-end?
I could also use a piece of the roof door jamb area, above the 3rd door would be best section if its clean.

**richard2717** · 02-18-2017, 09:39 PM

I have not decided if I am going to part the frame yet. I may keep it to put my 68 panel on. I will get some pictures posted in the morning of how I have cut the body up so far

*randy500* · 02-19-2017, 07:07 AM

What about the front door frames
3rd door frame with glass parts
rear glass, both sides, door and fake door
door panels

**Hart_Rod** · 02-19-2017, 11:27 AM

Are the rear window regulators any good?

**richard2717** · 02-19-2017, 11:34 AM

Quote:

Originally Posted by Hart_Rod

Are the rear window regulators any good?

I know the 4th door is not. it was froze up and the nylon wheels were missing. I have not dismantled the 3rd door yet. It rolls up and down decent but will need to check condition of rollers etc.

**richard2717** · 02-19-2017, 07:00 PM

rear sill has a few rust thru spots but still usable. $25 plus shipping

.

**richard2717** · 02-19-2017, 07:01 PM

Spare tire well would need bottom patched $20 plus shipping

.

**richard2717** · 02-19-2017, 07:04 PM

Not from this burb but a pair I bought a while back. I ended up finding a pair of full skins so i won't be needing these. They have some dents but the outside skins are rust free.

.

**richard2717** · 02-19-2017, 07:09 PM

Windshield pillars $25 each plus shipping

Gas cut out $40 plus shipping

A/C dash there is rust on the ends and would probably be better suited for a radio patch. $100 plus shipping for full dash (was cut at dash pad) or $100 shipped for radio patch

.

**richard2717** · 02-19-2017, 07:10 PM

Passenger side

.

**richard2717** · 02-19-2017, 07:11 PM

Driverside

.

*randy500* · 02-19-2017, 11:48 PM

Interested in the above driver door frame cut in last picture from B pillar forward

cucvzuz · 02-20-2017, 12:22 PM

How much for the drivers side quarter.

**jaros44sr** · 02-20-2017, 12:34 PM

Richard, I' ll take the passenger side w/s pillar, does it look the same as a blazer

**richard2717** · 02-20-2017, 01:24 PM

Quote:

Originally Posted by randy500

Interested in the above driver door frame cut in last picture from B pillar forward

Randy,
I already have these two sections cut and forgot to post them. They are from above the rear side windows on each side. One is about 37" and the other is about 39". I would need you to PM your shipping address for an exact quote but I am thinking it will be around $100-$125 for the 3rd door hinge post and one of these including shipping.

Richard

.

**richard2717** · 02-20-2017, 01:26 PM

Quote:

Originally Posted by cucvzuz

How much for the drivers side quarter.

do you want just the outside skin or as it is pictured with wheel tub and inner skin?

I would imagine shipping would be real expensive

LMK

Richard

**richard2717** · 02-20-2017, 01:30 PM

Quote:

Originally Posted by jaros44sr

Richard, I' ll take the passenger side w/s pillar, does it look the same as a blazer

Jim
the main part of the pillar is the same but it will not be the same at the top section, I don't imagine. I will compare it with my 71 blazer in a little while to see what if any differences there are. It may be just the horizontal top bar that is different.

Richard

02-18-2017, 03:04 PM	#1
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	72 suburban sheetmetal This ad is only for the sheetmetal on the burb. Nothing else is for sale atthe moment. She is pretty rusty in a lot of places but there is still a lot of usable metal on it. Let me know what you need. Prices start at $25 per cut plus shipping and go up from there depending on what you need. All the doors and rear gates are rusty . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-18-2017, 03:05 PM	#2
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 suburban sheetmetal 6-10 Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-18-2017, 03:06 PM	#3
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 suburban sheetmetal 11-15 Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-18-2017, 03:07 PM	#4
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 suburban sheetmetal 16-20 Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-18-2017, 04:51 PM	#5
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: 72 suburban sheetmetal RH "B" pillar to 98409?

02-18-2017, 07:21 PM	#7
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 suburban sheetmetal Almost completely cut apart. Let me know what you need. Broke my only sawzall blade. Even got the plywood out without damage. Only the little pc up front passenger side was no good . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-18-2017, 08:59 PM	#8
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: 72 suburban sheetmetal The way you have it cut is fine, for shipping cut it again someplace between the upper hinge and the raised portion between the doors.

02-18-2017, 09:04 PM	#9
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: 72 suburban sheetmetal I also just parted one of these and had some interest in the frame body mounts and rear frame section so keep that in mind when scrapping it. What do you want for that exhaust hangar at the far rear and are there any over the rear-end? I could also use a piece of the roof door jamb area, above the 3rd door would be best section if its clean.

02-18-2017, 09:39 PM	#10
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 suburban sheetmetal I have not decided if I am going to part the frame yet. I may keep it to put my 68 panel on. I will get some pictures posted in the morning of how I have cut the body up so far __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-19-2017, 07:07 AM	#11
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: 72 suburban sheetmetal What about the front door frames 3rd door frame with glass parts rear glass, both sides, door and fake door door panels

02-19-2017, 11:27 AM	#12
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: 72 suburban sheetmetal Are the rear window regulators any good? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

02-19-2017, 07:00 PM	#14
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 suburban sheetmetal rear sill has a few rust thru spots but still usable. $25 plus shipping . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-19-2017, 07:01 PM	#15
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 suburban sheetmetal Spare tire well would need bottom patched $20 plus shipping . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-19-2017, 07:04 PM	#16
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 suburban sheetmetal Not from this burb but a pair I bought a while back. I ended up finding a pair of full skins so i won't be needing these. They have some dents but the outside skins are rust free. . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-19-2017, 07:09 PM	#17
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 suburban sheetmetal Windshield pillars $25 each plus shipping Gas cut out $40 plus shipping A/C dash there is rust on the ends and would probably be better suited for a radio patch. $100 plus shipping for full dash (was cut at dash pad) or $100 shipped for radio patch . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.



Register or Log In To remove these advertisements.

02-19-2017, 07:10 PM	#18
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 suburban sheetmetal Passenger side . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-19-2017, 07:11 PM	#19
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 suburban sheetmetal Driverside . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-19-2017, 11:48 PM	#20
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: 72 suburban sheetmetal Interested in the above driver door frame cut in last picture from B pillar forward

02-20-2017, 12:22 PM	#21
cucvzuz Registered User Join Date: Jul 2010 Location: howell mi Posts: 248	Re: 72 suburban sheetmetal How much for the drivers side quarter.

02-20-2017, 12:34 PM	#22
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	Re: 72 suburban sheetmetal Richard, I' ll take the passenger side w/s pillar, does it look the same as a blazer __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.