![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
![]() Join Date: Sep 2002
Location: Alamogordo, NM
Posts: 709
|
Powerglide/TH350 Shifter Detent Difference
I am converting from a Powerglide to a TH350 on my 66. Is there any difference between the shifter detents on the bottom of the column?
Years ago I compared a rough dimensioned drawing I made of mine to a 67-72 TH350 column and it appeared to be the same or at least it would have seemed to work OK. Here's my PG detent: |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2014
Location: My Recliner in Rockingham,North Carolina
Posts: 99
|
Re: Powerglide/TH350 Shifter Detent Difference
My '63 has the powerglide detent and a 350 transmission installed by the previous owner. Everything works ok except that last drive position. I only have 2 instead of 3 drive detents. Never been a problem.
Hugh |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|