1968 K2500 power steering box mounting

[Bob's 70c-10]

Hello, I'm new to the site and I have a question that hopefully someone can help with. I have a 68 K2500 and I'm doing a p/s conversion. I have all the necessary parts including a captionfab plate (excellent piece highly recommend) to mount the box, but what I need help with is some measurements as well has any important advise about the placement of the box on the frame. Any help would be greatly appreciated. As well as links to threads that have done this on a 67 or 68 4x4
Thanks
Bob

[First c10]

Welcome to the site Bob,

My captainfab bracket came with an instruction sheet or template.
Here a a link to mine, sorry it doesn't have step by step but it does have pictures Post 60 or so


Hulk Jr Power steering

scroll down the page.

post up your progress with pictures....
Good Luck!!

[Bob's 70c-10]

Thanks for the reply first c-10
I didn't receive instructions with the plate.I was able to use threads like your and others I was able to get it figured out.
Thanks again for your help.

[First c10]

good to hear!