68 3/4 lwb 4x4 to swb? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

yeyo454 · 03-20-2002, 10:38 PM

I have a long wheel base 68 3/4 ton 4x4 and i want to shorten the frame into a swb. i have a spare shortbed, bed and want to make a 68 swb with 3/4 ton suspension.

Has anyone completed such a project and how much of the frame should i cut and from where shoud i cut it?

How do you guys join the frame again, plates and welding, screws or combo of both?

thanks! for any help.

REPO1 · 03-20-2002, 10:43 PM

Hey! There was just a post about exactly this same subject. I think its on page 2 right now. Just scroll down a bit. Lots of great info on that post.

------------------
Sylvan Lake, Alberta, Canada

03-20-2002, 10:38 PM	#1
yeyo454 Registered User Join Date: May 2001 Location: hollister Posts: 23	68 3/4 lwb 4x4 to swb? I have a long wheel base 68 3/4 ton 4x4 and i want to shorten the frame into a swb. i have a spare shortbed, bed and want to make a 68 swb with 3/4 ton suspension. Has anyone completed such a project and how much of the frame should i cut and from where shoud i cut it? How do you guys join the frame again, plates and welding, screws or combo of both? thanks! for any help.

03-20-2002, 10:43 PM	#2
REPO1 Shortbox wanna-be. Join Date: Mar 2002 Location: Fort St.John, British Columbia, Canada Posts: 773	Hey! There was just a post about exactly this same subject. I think its on page 2 right now. Just scroll down a bit. Lots of great info on that post. ------------------ Sylvan Lake, Alberta, Canada __________________ 1970 Chevy C20 Custom Camper 402BB Turbo 400 trans. (Slowly becoming a '70 shortbox 1/2 ton) '71 Camaro SS 402/T400 resto '97 Z28 (11.41@127MPH)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.