Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
03-31-2017, 07:06 PM | #1 |
Registered User
Join Date: Nov 2008
Location: Cape cod, ma.
Posts: 394
|
WTB stock 3/4 ton 4x4 leaf spring shackles and shackle mounts
On my 72 gmc jimmy 4x4 I have a 6" lift with 1 ton axles and it won't pass inspection because they said lift is to high. In MA. 2.5 inch lift is max so I'm looking for bone stock leaf spring shackles and shackle mounts that were found on stock 3/4 ton 4x4 1972 gmc jimmys shipping would be to 02631
Last edited by gmc1971harwich; 03-31-2017 at 08:05 PM. Reason: Clarification |
03-31-2017, 07:22 PM | #2 |
Registered User
Join Date: Oct 2007
Location: Fairfield, PA
Posts: 503
|
Re: WTB stock 3/4 ton leaf spring shackles and shackle mounts
Do 72 3/4 ton 2wd hangers work for your application?
|
03-31-2017, 08:04 PM | #3 |
Registered User
Join Date: Nov 2008
Location: Cape cod, ma.
Posts: 394
|
Re: WTB stock 3/4 ton leaf spring shackles and shackle mounts
I think they have to be 4x4
|
03-31-2017, 08:06 PM | #4 |
Registered User
Join Date: Nov 2008
Location: Cape cod, ma.
Posts: 394
|
Re: WTB stock 3/4 ton leaf spring shackles and shackle mounts
I need them for the front and rear leaf springs
|
04-14-2017, 06:15 PM | #5 |
Registered User
Join Date: Nov 2008
Location: Cape cod, ma.
Posts: 394
|
Re: WTB stock 3/4 ton leaf spring shackles and shackle mounts
Anybody have stock 4wd front and rear leaf spring mounts and shackles they wanna sell?
|
04-15-2017, 01:38 PM | #6 |
Account Suspended
Join Date: Dec 2016
Location: Springdale, AR
Posts: 834
|
Re: WTB stock 3/4 ton leaf spring shackles and shackle mounts
I can do front and rear 1/2 ton 4wd from as minimal to as complete as you need, if 1/2 ton will get you where you need to be.
|
04-17-2017, 10:24 AM | #7 |
Registered User
Join Date: Nov 2008
Location: Cape cod, ma.
Posts: 394
|
Re: WTB stock 3/4 ton leaf spring shackles and shackle mounts
I'm going from 38 inch tires to 255/79r16 all terrain which come out to 30 inch tires should be ok with clearance I would think how much would it be for the front and rear leaf spring mounts with shackles shipped to 02631 might be a week or 2 before I can buy them but nice to get a $ estimate to plan ahead. I plan to sell the old lift kit mounts after installing stock stuff. I think I should be able to reuse the leaf springs how do I measure them to make sure they will still work?
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|