trucks uneven???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DARK OLIVE 72CHEYENNE · 04-10-2002, 08:29 PM

my truck is a 72 shortwheelbase and the front end sets 2 inches lower on the drivers side front,,than the other side what would cause that?? ive changed the cois put new ones on..and its still the same..and the cab mounts are good too,,,what could it be? the shocks,maybe? when i measured the hieght of each shock,they were an inch different,,can you help o this,,,thanks

chevy68388 · 04-10-2002, 08:34 PM

has it ever been wreaked my was and it still to this day dosnt sit rightbut also my frame bent the tryed to make it straight again but they didnt do areal good job

**Desert Rat** · 04-13-2002, 03:39 PM

Is it with someone sitting in the truck when you measure?

maybe one exhaust manifold is heavier,tires got same pressure?My box does this on mine.HEY you could always put a 2" drop spring on the one side.Kinda cheesy but it may work.

billogna · 04-14-2002, 06:21 PM

I've had one coil cut shorter than the other for four years and it doesn't bother me. I had a frame shop look at my truck and it's got a buckled frame. It could be fixed with "only" four or five hours of labor, but I'm a cheap skate. I'd rather find another sb frame, like that's gonna happen...

------------------
'69 Custom 10 SB
'66 Mustang Sprint
'77 Sportster

1-PU70 · 04-15-2002, 04:03 PM

Check the radiator core support bussings.

loenuf · 04-18-2002, 09:38 PM

check and make sure your lower a arm is not bent, and check the rear end and make sure both spring packs or coils are the same hight.....

04-10-2002, 08:29 PM	#1
DARK OLIVE 72CHEYENNE Registered User Join Date: Jan 2002 Location: East,,Tennessee Posts: 211	trucks uneven???? my truck is a 72 shortwheelbase and the front end sets 2 inches lower on the drivers side front,,than the other side what would cause that?? ive changed the cois put new ones on..and its still the same..and the cab mounts are good too,,,what could it be? the shocks,maybe? when i measured the hieght of each shock,they were an inch different,,can you help o this,,,thanks

04-10-2002, 08:34 PM	#2
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	has it ever been wreaked my was and it still to this day dosnt sit rightbut also my frame bent the tryed to make it straight again but they didnt do areal good job __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

04-14-2002, 06:21 PM	#4
billogna Registered User Join Date: Apr 2002 Location: Choctaw, OK Posts: 235	I've had one coil cut shorter than the other for four years and it doesn't bother me. I had a frame shop look at my truck and it's got a buckled frame. It could be fixed with "only" four or five hours of labor, but I'm a cheap skate. I'd rather find another sb frame, like that's gonna happen... ------------------ '69 Custom 10 SB '66 Mustang Sprint '77 Sportster __________________ '69 Chev Cust/10 swb, 350/700R4, 5"/6" '70 Chev C10 swb, 67 front, 454/700r4, 4"/5" '73 Chev stepper, 350/3 spd '84 Chev K20 350/4 spd '91 GMC 1500 Suburban 4x4, 350/700R4

04-15-2002, 04:03 PM	#5
1-PU70 Registered User Join Date: Apr 2000 Location: Bradenton, FL Posts: 1,036	Check the radiator core support bussings. __________________ 1970 CST/10 402,700R4,3:73 posi,AC,PS,PB,TLT,PW,Buckets with heaters

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-13-2002, 03:39 PM	#3
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	Is it with someone sitting in the truck when you measure? maybe one exhaust manifold is heavier,tires got same pressure?My box does this on mine.HEY you could always put a 2" drop spring on the one side.Kinda cheesy but it may work.

04-18-2002, 09:38 PM	#6
loenuf Registered User Join Date: May 2000 Location: trenton texas usa Posts: 232	check and make sure your lower a arm is not bent, and check the rear end and make sure both spring packs or coils are the same hight.....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.