|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-01-2017, 03:51 PM
|
#1 |
|
Registered User
Join Date: Mar 2017
Location: Los Angeles
Posts: 10
|
Clutch pedal mounting bracket?
Hey all -
Installing a 350 SBC in my 66 C-10 and my mechanic is saying there is no place to mount bracket for clutch linkage on the 350 as there is on side of the 6 cylinder block that we pulled out. Is there a kit offered to adapt that to the 350 block? Thanks! |
|
|
|
05-01-2017, 06:49 PM
|
#2 |
|
Chevy addict
Join Date: May 2012
Location: Iron Ridge, WI
Posts: 1,085
|
Re: Clutch pedal mounting bracket?
The pivot ball that is mounted on a 6 cyl bracket comes off and screws right into the SBC above the oil filer
|
|
|
|
|
05-01-2017, 08:02 PM
|
#3 |
|
Registered User
 
Join Date: Oct 2012
Location: Eldon, MO
Posts: 1,753
|
Re: Clutch pedal mounting bracket?
You can buy a screw in pivot ball for that, but it seems like I read some of the newer blocks do not have a hole drilled and tapped for it. This could be the case here.
|
|
|
|
|
05-01-2017, 11:40 PM
|
#4 |
|
60-66 Nut
 Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Clutch pedal mounting bracket?
The clutch bellcrank ballstud screws directly into the block in the forward position. Of course this is assuming that the engine was installed in the correct factory location for a small block. Also as said above, some blocks do not have the boss for a clutch bellcrank ballstud.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
