GA 5 lug 1/2 ton 2wd lwb 73-87 frame, suspension, 12 bolt rear, 2pc driveshaft for conve

[rainamy]

Figured I'd post it here as well since someone may need this for their project.



My old parts truck ill be getting rid of has a nice 5 lug front suspension, 5 lug 12 bolt rear, and whatever else you might be interested in for the conversion (2 pc driveshaft, frame itself for the perches/rear leafs, etc)

Needs a price so let's throw out there $125 for the complete front suspension, you remove, and $250/bo to start for the rear end, also you remove, since I don't know much about the going rates. These are nice Georgia parts to clean up and paint, not heavily pitted salt belt stuff.

[camper guy]

Hello-i am interested in the complete if it would happen to have a 3.73 gearing.

[camper guy]

Should say complete rear end-sorry

[rainamy]

Originally Posted by camper guy

Hello-i am interested in the complete if it would happen to have a 3.73 gearing.

There isn't a SPID label left on the truck, but, I can possibly try the spin the wheel test and estimate from the yoke revolutions.



Also. As an aside, it looks like the 2 pc driveshaft is pending sale.

[LockDoc]

Originally Posted by rainamy

There isn't a SPID label left on the truck, but, I can possibly try the spin the wheel test and estimate from the yoke revolutions.



Also. As an aside, it looks like the 2 pc driveshaft is pending sale.

You might check and see if their is a code stamped on the rear end. Check posts #8 and #19 in this thread for possible code letter locations and use the charts to look it up....

http://67-72chevytrucks.com/vboard/s...d.php?t=578793
LockDoc

[rainamy]

Rear end looks to be a 3.08 ratio, non-posi.

[rainamy]

Remembered some parts I had on a shelf over in the barn, if interested I have a set of 3.73 gears from a 12 bolt rear end (and a new in box chrome differential cover too) that can be thrown in.

Can do the rear differential, extra set of gears, and shiny new chrome cover for $350.

Pics of the gear set: