67-72 step side bagged - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68step · 04-04-2004, 04:29 PM

Doe anyone have any pics of a stepside bagged? I dont think I have ever seen one is it possible with the wheelwells?

Joe67 · 04-04-2004, 07:53 PM

Here is the bagged stepside that AirDaddy had

Joe67 · 04-04-2004, 07:54 PM

#2

68step · 04-05-2004, 10:25 PM

Thanks for the pics I wasnt sure about the clearence on the step side bed.

XXL · 04-06-2004, 01:40 AM

Quote:

Originally posted by 68step
Thanks for the pics I wasnt sure about the clearence on the step side bed.

Rear clearance is tight. Measure plenty before you commit to wheels.

68step · 04-06-2004, 01:56 AM

Thats about were I want to be what size wheels are those?Is that bags drop spindles or crossmember work also? thanks

Faster_than_you · 04-08-2004, 05:42 PM

o.k. for a near frame drop, which is what I want, I have looked into getting a 2.5" dropped spindle. I plan on getting a 3" c notch, air bag it 4 ways. I want to get a seperate pump and tank for the rear and for the back. been told that should be all you would need for the air bag drop. now there have been numerous posts on air bag set ups on this board, and pictures. they look very nice. I would also recommend getting the 1/2" setup. it would give you a faster air up time. then you can also go with larger air bags in the future. that way you can usually get into any competion of "air hopping" show and also if you built up your truck you can even go to the racing scene. That would be very bad ass indeed.

Faster_than_you · 04-08-2004, 05:46 PM

also as far as your wheel wells are thought of for a major drop. I had planned on just making some new wheel wells, polish up the steel, and that way it would give you a bigger feeling of customizing. it also will jazz up the engine bay. the bed I have seen many just to have the wheel weels go all the way across. that looks nice. there are many options you can go with for the wheel wells. I think truckin mag had a section last year on custom bed looks. if you have made the frame and suspension look awesome I would go with plexi glassing your bed wheel wells. it would show off your hard work for people to notice easier.

04-04-2004, 04:29 PM	#1
68step Registered User Join Date: Mar 2004 Location: Nor kal Posts: 59	67-72 step side bagged Doe anyone have any pics of a stepside bagged? I dont think I have ever seen one is it possible with the wheelwells? __________________ 95 sfa 38.5 swamper TBI vortech 68 chevy stepside

04-04-2004, 07:54 PM	#3
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	#2 __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

04-05-2004, 10:25 PM	#4
68step Registered User Join Date: Mar 2004 Location: Nor kal Posts: 59	Thanks for the pics I wasnt sure about the clearence on the step side bed. __________________ 95 sfa 38.5 swamper TBI vortech 68 chevy stepside

04-06-2004, 01:56 AM	#6
68step Registered User Join Date: Mar 2004 Location: Nor kal Posts: 59	Thats about were I want to be what size wheels are those?Is that bags drop spindles or crossmember work also? thanks __________________ 95 sfa 38.5 swamper TBI vortech 68 chevy stepside

04-08-2004, 05:42 PM	#7
Faster_than_you Registered User Join Date: Mar 2004 Location: Virginia beach, Va Posts: 209	o.k. for a near frame drop, which is what I want, I have looked into getting a 2.5" dropped spindle. I plan on getting a 3" c notch, air bag it 4 ways. I want to get a seperate pump and tank for the rear and for the back. been told that should be all you would need for the air bag drop. now there have been numerous posts on air bag set ups on this board, and pictures. they look very nice. I would also recommend getting the 1/2" setup. it would give you a faster air up time. then you can also go with larger air bags in the future. that way you can usually get into any competion of "air hopping" show and also if you built up your truck you can even go to the racing scene. That would be very bad ass indeed. __________________ ~Christopher L. Orr 71 c20, 454- Stolen While Deployed. dynoed at 550 ft lbs, 425 hp at 3000 rpm (mustang dyno). TH400 3500 stall.... etc, etc.

04-04-2004, 07:53 PM	#2
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Here is the bagged stepside that AirDaddy had __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

04-08-2004, 05:46 PM	#8
Faster_than_you Registered User Join Date: Mar 2004 Location: Virginia beach, Va Posts: 209	also as far as your wheel wells are thought of for a major drop. I had planned on just making some new wheel wells, polish up the steel, and that way it would give you a bigger feeling of customizing. it also will jazz up the engine bay. the bed I have seen many just to have the wheel weels go all the way across. that looks nice. there are many options you can go with for the wheel wells. I think truckin mag had a section last year on custom bed looks. if you have made the frame and suspension look awesome I would go with plexi glassing your bed wheel wells. it would show off your hard work for people to notice easier. __________________ ~Christopher L. Orr 71 c20, 454- Stolen While Deployed. dynoed at 550 ft lbs, 425 hp at 3000 rpm (mustang dyno). TH400 3500 stall.... etc, etc.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.