![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#26 | |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Alignment Shop Ruined My Alignment
Quote:
http://67-72chevytrucks.com/vboard/s...d.php?t=681834 Based on my research P/N FH03 also works (these are the ones I received from Kenny's Trucks) and is only $10 each through summit if you don't care about the 100% correct factory look. https://www.summitracing.com/parts/rsd-fh03
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
|
![]() |
![]() |
![]() |
#27 |
Registered User
![]() Join Date: Jul 2015
Location: 2nd left past the stump on a dirt road.
Posts: 2,629
|
Re: Alignment Shop Ruined My Alignment
Be backs are a sign of F$%# You. I would not ever do business with them again, not to mention they would be paying my fuel, time and new parts to have someone else put it back together correctly.
|
![]() |
![]() |
![]() |
#28 | |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: Alignment Shop Ruined My Alignment
Quote:
Sadly, Kenny no longer comes to the swap meets and sets up his store.
__________________
I'm on the Instagram- @Gearhead_Kevin |
|
![]() |
![]() |
![]() |
#29 |
Registered User
Join Date: Nov 2007
Location: Eureka, CA
Posts: 60
|
Re: Alignment Shop Ruined My Alignment
Thanks for the control arm photo Glenn, that matches what is on my truck. I asked the shop manager when I brought it back and he said the mechanic did one side at a time, so that is a load off my mind. Still waiting for them to get the work swapping the center link around done.
__________________
Stan Feldsine - Build Thread - http://67-72chevytrucks.com/vboard/s...d.php?t=673856 1969 C10 LWB Fleetside - 350 - 700R4 1971 C20 LWB Fleetside - 350 - TB350 |
![]() |
![]() |
![]() |
#30 |
Registered User
Join Date: May 2012
Location: South Ogden, Utah
Posts: 172
|
Re: Alignment Shop Ruined My Alignment
Subscribed. Just in case...
__________________
'71 C/20 350/T350. |
![]() |
![]() |
![]() |
#31 |
Registered User
Join Date: Nov 2007
Location: Eureka, CA
Posts: 60
|
Re: Alignment Shop Ruined My Alignment
Got the truck back this morning. Much better.
No longer darts around, I can take my hand off the wheel over a bumpy road and it tracks straight. Cornering no longer over steers. Full lock turns now doesn't have tires fighting each other. The only thing left that could be a minor irritant is the caster. The steering wheel is slow to come back to center after a turn. I have to help it make it all the way back, but it is waaay better than before, when I had to wrench it back. I'm chalking this up to all new parts that need to get broken in and loosened up a bit, I hope. Here are the alignment specs before and after that they gave me on the alignment sheet. Before After Caster Left 1.55 1.58 Right 1.86 1.84 Camber Left 0.63 0.80 Right 0.41 0.43 Toe Left -0.43 0.06 Right -0.80 0.06 Total -1.23 0.13 I'd like to thank all you folks that help me with this. There is no telling how long I would have been fighting this without your assistance. Thank you again, very much!
__________________
Stan Feldsine - Build Thread - http://67-72chevytrucks.com/vboard/s...d.php?t=673856 1969 C10 LWB Fleetside - 350 - 700R4 1971 C20 LWB Fleetside - 350 - TB350 |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|