Replacing the steering column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nacho_73 · 06-26-2017, 08:22 AM

Hi every one

I changed my old Th250 for a TH700r4 so I need change the column to maintain the shift in the column. Can I install a 84 steering column y my 79 C10 or I need some modifications to make ir work?

Thanks for antes advice

Best regards

Malo83 · 06-26-2017, 03:42 PM

Check with these guys, my column on my 83 was shot, it was an auto 4 speed column for the 700R4, very happy with the rebuilt they sent me

http://www.columnsgalore.com/tech.htm

06-26-2017, 08:22 AM	#1
nacho_73 Registered User Join Date: Jun 2017 Location: Chile Posts: 18	Replacing the steering column Hi every one I changed my old Th250 for a TH700r4 so I need change the column to maintain the shift in the column. Can I install a 84 steering column y my 79 C10 or I need some modifications to make ir work? Thanks for antes advice Best regards

06-26-2017, 03:42 PM	#2
Malo83 Cruzzzn' Vet Join Date: Jan 2005 Location: Porterville,Ca. Posts: 1,918	Re: Replacing the steering column Check with these guys, my column on my 83 was shot, it was an auto 4 speed column for the 700R4, very happy with the rebuilt they sent me http://www.columnsgalore.com/tech.htm

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.