Bed for sale!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 02-19-2004, 04:40 PM

This is a nice bed, one small rust spot in FLOOR back right, maybe a 1 1/2 big, no other rust. Its been repainted but I cannot find any bondo in the bed. No tailgate. $500. Glock has first shot on it. Thanks Randy

teeitup · 02-19-2004, 04:41 PM

very bottom right of bed floor you can see rust spot

teeitup · 02-19-2004, 04:41 PM

hi

rambler · 02-19-2004, 06:10 PM

Nice looking bed!! too bad it wasn't on the truck I bought from ya!!! LOL but, I think you might be mistaken,, looks like there is a tailgate on that bed

teeitup · 02-19-2004, 06:44 PM

yes there was one Joe, pics were taken 3 months ago, green grass and no snow.

Gate is sold already.

70c10 · 02-19-2004, 06:55 PM

Randy, that bed looks awesome!. Since it was repainted, you could try running a magnet around to see if it falls off anywhere!. That would help you find any bondo if it was present. Just a thought.

rambler · 02-19-2004, 07:06 PM

Quote:

Originally posted by teeitup
yes there was one Joe, pics were taken 3 months ago, green grass and no snow. Gate is sold already.

LOL,, I figured,, just kidding with ya.. and I know you didn't have that when I bought that truck,,

this summer I'll be needing a few more parts,, the rear end is working great on mine,, and the engine works good on that parts truck as well,, going to put that in my 67 this summer, took the seat and dash pad off and put it in my 72,, and the heater controls...thanks again... !

teeitup · 02-24-2004, 09:41 PM

Still for sale, first come first gets it!!!

ZOOMY · 04-08-2004, 06:39 AM

Still available ?...........Thanks.........Zoomy

teeitup · 04-08-2004, 09:01 AM

I'm pretty sure its sold Dave, its even going to Wisc. too. Thanks Randy

ZOOMY · 04-09-2004, 04:33 AM

I told Gordo it was a good one......ZZ

teeitup · 04-09-2004, 09:01 AM

THANKS Dave, I appreciate it. Randy

teeitup · 04-10-2004, 09:35 AM

Bed is sold to Gord in Wisc. THANKS to Gord and also to ZOOMY for the reference!!!!!!!!!!

72gord · 04-11-2004, 11:58 AM

Hey guys,
Randy thanks for the great bed, Zoomy thanks for the advice and showing me your stuff. Also Randy, I didn't catch those guys name that helped us load the box and cab, but give a big thanks from me...saved going after that backhoe. It was a great road trip down....got to see some new scenery....1160 mile round trip...the 8.1 in my 2001 HD got 12mpg @ 80mph pulling the trailer. Thought that wasn't too bad at that speed....what's every body else think.

**BIG ORANGE** · 04-11-2004, 11:28 PM

Dont you just love it when you get what you want and on top of that you meet good people like teeitup/Randy!!!!!!!!

teeitup · 04-12-2004, 09:09 AM

THANKS Donnie, one of these days I'll hopefully make it out there to meet you!!!!!!

02-19-2004, 04:40 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Bed for sale!!!! This is a nice bed, one small rust spot in FLOOR back right, maybe a 1 1/2 big, no other rust. Its been repainted but I cannot find any bondo in the bed. No tailgate. $500. Glock has first shot on it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-19-2004, 04:41 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	very bottom right of bed floor you can see rust spot __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-19-2004, 04:41 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	hi __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-19-2004, 06:10 PM	#4
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	Nice looking bed!! too bad it wasn't on the truck I bought from ya!!! LOL but, I think you might be mistaken,, looks like there is a tailgate on that bed __________________ No matter where you are..... There you are... Buckaroo Banzi

02-19-2004, 06:44 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	yes there was one Joe, pics were taken 3 months ago, green grass and no snow. Gate is sold already. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-19-2004, 06:55 PM	#6
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Randy, that bed looks awesome!. Since it was repainted, you could try running a magnet around to see if it falls off anywhere!. That would help you find any bondo if it was present. Just a thought. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

02-24-2004, 09:41 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Still for sale, first come first gets it!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-08-2004, 06:39 AM	#9
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	ttt Still available ?...........Thanks.........Zoomy

04-08-2004, 09:01 AM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	I'm pretty sure its sold Dave, its even going to Wisc. too. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-09-2004, 04:33 AM	#11
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	bed I told Gordo it was a good one......ZZ

04-09-2004, 09:01 AM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	THANKS Dave, I appreciate it. Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-10-2004, 09:35 AM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Bed is sold to Gord in Wisc. THANKS to Gord and also to ZOOMY for the reference!!!!!!!!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-11-2004, 11:58 AM	#14
72gord Never enough time!! Join Date: Mar 2004 Location: sw Wisconsin Posts: 601	Hey guys, Randy thanks for the great bed, Zoomy thanks for the advice and showing me your stuff. Also Randy, I didn't catch those guys name that helped us load the box and cab, but give a big thanks from me...saved going after that backhoe. It was a great road trip down....got to see some new scenery....1160 mile round trip...the 8.1 in my 2001 HD got 12mpg @ 80mph pulling the trailer. Thought that wasn't too bad at that speed....what's every body else think.

04-11-2004, 11:28 PM	#15
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,764	Dont you just love it when you get what you want and on top of that you meet good people like teeitup/Randy!!!!!!!! __________________ Things happen for a reason!

04-12-2004, 09:09 AM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	THANKS Donnie, one of these days I'll hopefully make it out there to meet you!!!!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.