CO Cab Leftovers And More

[646870SS]

Payment Sent - thanks again.

[718jwh]

Just need the outer cowl in new picture need the flange spot welded to inner, I PMed you my phone number as well
Thanks
John

[4554bbl]

if you can cut the grille to include the mounts 40.00 shipped sounds fine. im not worried about cracks, ill epoxy those, just as long as there are no missing pieces. ive put $ in my paypal today to pay for this. as soon as it clears i can send the $ if you will wait a few days. if not, i understand, thanks, chris.

[mkmc69]

Originally Posted by 402Bowtie

Yes, that is included. I will send PM with payment info later today.



So cut from top to bottom where my red lines are in the picture below? That appears to be in the area where the mounts are...do you want me to cut through the middle of mounts, include the mounts, or exclude the mounts? I'm thinking $40 shipped. It appears based on the picture that there are at least two cracks within the two red lines. I can check condition tonight.



Yes, $65 shipped for both. Please respond to thread.



The front clip harness was already claimed by Chevy Fan Always above. You would be next in line if he doesn't pay. The interior wiring harness has some cuts. I would want $15 shipped for the fuse block. $20 shipped for both interior harness and fuse block.




The front clip harness was already claimed...you would be third in line for it. For everything el

se on the list I would do $100 shipped.

OK, sounds good. PM me your PayPal info and I will get you paid tomorrow afternoon. Thanks.

[402Bowtie]

TTT -- A few things have shipped. Still working on other orders. And still have lots of cab and front fender sheet metal available to cut! I will be taking the leftovers to the scrap yard soon, so let me know!

[402Bowtie]

Just about last call for cab cuts....

[402Bowtie]

ttt

[646870SS]

Radio arrived today! Better than I was expecting - thank you very much! It is a really nice piece after I detailed it up.

[white67]

Drivers side bottom where the door closes ? I can try and send you a pic of the damage I have to see if you could cut the piece to fix it
Tim

[402Bowtie]

Originally Posted by 646870SS

Radio arrived today! Better than I was expecting - thank you very much! It is a really nice piece after I detailed it up.

Good to hear!

Originally Posted by white67

Drivers side bottom where the door closes ? I can try and send you a pic of the damage I have to see if you could cut the piece to fix it
Tim

I took everything to scrap yard today. I still have emblems, column, outer grille and some of the inner grille.

[Chevy Fan Always]

I got the harness today, looks nice.
Thanks Mike

[NorthernMatthew]

Well I'm looking for a 3948434 console latch assembly, good working condition -- happen to have one of those?

[402Bowtie]

Originally Posted by Chevy Fan Always

I got the harness today, looks nice.
Thanks Mike

Good to hear!

Originally Posted by NorthernMatthew

Well I'm looking for a 3948434 console latch assembly, good working condition -- happen to have one of those?

Sorry, I only have one and I'll be using it.

[wmurdock72]

can i have the heater core brackets and screws? also, the screws for the blower motor that attach it to the box and any of the screws and nuts for the heater box? I have the main two bolts that come from inside the cab but if I could get the brackets and the rest of the hardware. Let me know, thanks

[402Bowtie]

Originally Posted by wmurdock72

can i have the heater core brackets and screws? also, the screws for the blower motor that attach it to the box and any of the screws and nuts for the heater box? I have the main two bolts that come from inside the cab but if I could get the brackets and the rest of the hardware. Let me know, thanks

Sorry I now only have the column and emblems.